Filter
Sort:
Show:
ENGINEER’S BENCH VICE

ENGINEER’S BENCH VICE

In Stock
  • Manufactured from shock resisting cast iron, free from sand holes, pits, blow holes, scrabs and other imperfection.
  • Unbreakable malleable steel nut for extra tuff grip.
BENCH & DRILL PRESS VICE -MULTI FUNCTION

BENCH & DRILL PRESS VICE -MULTI FUNCTION

In Stock
  • Manufactured from steel grade cast iron.
  • 1/4''-3'' pipe Jaw Capacity .
  • 6'' Pipe capacity using 4 Pins.
BENCH VICE -MULTIPURPOSE ROTATING

BENCH VICE -MULTIPURPOSE ROTATING

In Stock
  • Rotating Head .
  • Hardened Steel jaws-Replaceable.
  • Integrated Pipe Jas.
WORKSHOP BENCH VICE – 240° SWIVEL BASE

WORKSHOP BENCH VICE – 240° SWIVEL BASE

In Stock
  • Manufactured from steel grade cast iron.
  • Can also hold round pipes from 1/2'' to 1-3/4''.
  • A choice of every workshop / Garage / D.I.Y.
  • Weight 4.5 kg /9 lbs
STEEL BENCH VICE

STEEL BENCH VICE

In Stock
  • Manufactured from High Tensile Steel Plate
  • Swivel Base provides flexibility for locking at any desired angle by its low profile 360°.
  • Ideal for Machinist or Craftsmen.
OFFSET JAW VICE

OFFSET JAW VICE

In Stock
  • Robust Construction. Manufactured from Fabricated Steel
  • Offset feature provides the facility for holding long vertical work with the full width of the jaws without obstruction from the main body of the vice.
ADJUSTABLE TAILSTOCK

ADJUSTABLE TAILSTOCK

In Stock
  • Mini tailstock are relatively inexpensive than any other tailstock.
  • Relatively small & light so they fit into the budgets.
 
ADJUSTABLE TAILSTOCK

ADJUSTABLE TAILSTOCK

In Stock
  • Mini tailstock are relatively inexpensive than any other tailstock.
  • Relatively small & light so they fit into the budgets.
MINI TAILSTOCK TILTING

MINI TAILSTOCK TILTING

In Stock
  • Manufactured from Seasoned Cast Iron
  • Adjustable to Height 38-63mm
DIVIDING PLATE SET

DIVIDING PLATE SET

In Stock
  • Mde to fit our 150mm and Tilting Rotary Tables 100mm.
  • Plate 'A'- 15, 16, 17, 18, 19, 20
  • Plate 'B'- 21, 23, 27, 29, 31, 33
  • Plate 'C'- 37, 39, 41, 43, 47, 49
  • Comes complete with Necessary Screws, Washers & handles
ROTARY TABLE TILTING-4-3/8

ROTARY TABLE TILTING-4-3/8

In Stock
  • Can be Tilted from 0° to 180°.
  •  Engage & Disengage Function for manual indexing.
BORING BAR WITH HOLDER

BORING BAR WITH HOLDER

In Stock
  • Manufactured from good quality tool steel
  • Supplied with 1 Allen key
  • Tool bit not included
DRILL CHUCK ARBOR

DRILL CHUCK ARBOR

In Stock
  • Drill chuck arbors are double ended steel shafts.
  • One end is machined to fit a machine spindle and the other fits into the back of a drill chuck.
OPEN END SLEEVE WITH EXTRACTOR – AS PER DIN 228

OPEN END SLEEVE WITH EXTRACTOR – AS PER DIN 228

In Stock
  • Hardened & ground both internal & external
EXTENSION SLEEVES-AS PER DIN 2187

EXTENSION SLEEVES-AS PER DIN 2187

In Stock
  • Manufactured From Case Hardened Steel.
  • Used For Extending The Taper Shank Tools.
  • Precision Ground From Both Inside & Outside In "A" Grade.
 
VALVE SEAT & FACE CUTTER SETS – PROFESSIONAL- 45°

VALVE SEAT & FACE CUTTER SETS – PROFESSIONAL- 45°

In Stock
  • Manufactured from high grade carbon steel, properly hardened & tempered.
  • The cutting edge of all the cutters are accurately ground for best results.

Filter Products

Categories

Product Status