Filter
Sort:
Show:
SINE VICE -PIN TYPE

SINE VICE -PIN TYPE

In Stock
  • Manufactured from Hardened & Ground Tool Steel .
  • Mounted on Hardened, ground rollers the vice can be inclined in the position with the help of side strap clamp.
  • The recess of 1mm depth is made in base plate for minute angle adjustment
TOOL MAKERS STEEL VICE -SCREW LESS TYPE

TOOL MAKERS STEEL VICE -SCREW LESS TYPE

In Stock
  • Hardened & Ground Steel Vice .
  • The rapid positioning notched allow the vice to be locked at any desired  position by allen key .
  • V-Grooves in jaws facilitates holding of round jobs
TOOL MAKERS STEEL VICE -SCREW TYPE

TOOL MAKERS STEEL VICE -SCREW TYPE

In Stock
  • Manufactured from selected tool steel hardened 55-60 hrc.
  • Accuracy for squareness, flatness & parallelism within 0.010mm
  • Wear plate at bottom to prevent lifting of jaw.
HIGH-PRECISION GRINDING AND CONTROL VISE

HIGH-PRECISION GRINDING AND CONTROL VISE

In Stock
A Very High Precision Grinding Vice for Accurate Grinding Jobs. Tool steel, through-hardened, fully precision-ground.
DIVIDING PLATE SET

DIVIDING PLATE SET

In Stock
  • Mde to fit our 150mm and Tilting Rotary Tables 100mm.
  • Plate 'A'- 15, 16, 17, 18, 19, 20
  • Plate 'B'- 21, 23, 27, 29, 31, 33
  • Plate 'C'- 37, 39, 41, 43, 47, 49
  • Comes complete with Necessary Screws, Washers & handles
ROTARY TABLE TILTING-4-3/8

ROTARY TABLE TILTING-4-3/8

In Stock
  • Can be Tilted from 0° to 180°.
  •  Engage & Disengage Function for manual indexing.
Solid Angle Plates

Solid Angle Plates

In Stock
  • Manufactured from good quality seasoned casting.
  • Properly hardened & ground from all the sides.
  • Properly Machined 900Square.
  • Precision groundsides & end.
 
Iron Casted Slotted Angle Plates

Iron Casted Slotted Angle Plates

In Stock
  • Manufactured from good quality seasoned casting.
  • Properly hardened & ground from all the sides.
  • Properly Machined 900Square.
V- Angle Plates

V- Angle Plates

In Stock
  • Manufactured from good quality seasoned casting.
  • Combined Vee Block & Angle Plate.
Stepped Angle Plates

Stepped Angle Plates

In Stock
  • Hardened and Precision ground.
  • Tapped holes for clamping jobs in any position
Vice For Rotary Table

Vice For Rotary Table

In Stock
4″ Rotary Vice for 100mm Rotary Table Round vice ideally suited for 4″ (100mm) rotary tables. It is supplied with fixing bolts and Handle Its Jaw opening 40mm, Jaw width 77mm, Jaw height 20mm.
Rapid Indexer Horizontal & Vertical

Rapid Indexer Horizontal & Vertical

In Stock
  • Rapid Indexer With Chuck
  • Gear Ratio 24:1
  • Manufacturing from closed grained cast iron.
Rotary Table – Tilting MT-2, 4″/100mm

Rotary Table – Tilting MT-2, 4″/100mm

In Stock
  • Can be Tilted from 0 to 180°.
  • Engage & Disengage Function for manual indexing
Rotary Table Horizontal & Vertical – 6″/150mm

Rotary Table Horizontal & Vertical – 6″/150mm

In Stock
Engage & Disengage Function for manual indexing.
Rotary Table 4″/ 100MM

Rotary Table 4″/ 100MM

In Stock
  • High Precision Quality Made Low Profile Rotary Table
  • Center Height in vertical position: 2-1/16" (50mm approx) Hand wheel is graduated in divisions of 10 min & can be set to zero.
  • Can be mounted both in Horizontal & vertical position
Rotary Table – Tilting 3″/75mm

Rotary Table – Tilting 3″/75mm

In Stock
  • Precision Mini Rotary Table 3" 75mm is manufactured from Seasoned casting.
  • Precisely maintained Chuck Run Out and Botton Surface for accurate work.
  • 4 T Slots for fixing work can be used with Clamping kit.

Filter Products

Categories

Product Status