Filter
Sort:
Show:
VICE MOUNTED BENDER

VICE MOUNTED BENDER

In Stock
  • The primary purpose of a vice-mounted wire bender is to bend wires accurately and consistently. It is often used in metalworking, jewelry making, and other crafts where precise wire shapes are required.
  • Design: These benders are designed to be mounted on a vice, providing stability and control during the bending process. The vice holds the wire securely in place while the bending mechanism shapes the wire   according to the desired pattern or angle.
  • Users typically insert the wire into the bender and secure it in the vice. The user then adjusts the position of the wire and applies pressure to create the desired bend.
INDEXABLE TURNING TOOL SET OF 7PC WITH INSERTS

INDEXABLE TURNING TOOL SET OF 7PC WITH INSERTS

In Stock
  • Turning tool set for indexable inserts
  • 7 pieces with key
  • Each turning tool with indexable insert of carbide metal quality the indexable inserts have 4 cutting edges Insert shape CCMT
DIVIDING PLATE SET

DIVIDING PLATE SET

In Stock
  • Mde to fit our 150mm and Tilting Rotary Tables 100mm.
  • Plate 'A'- 15, 16, 17, 18, 19, 20
  • Plate 'B'- 21, 23, 27, 29, 31, 33
  • Plate 'C'- 37, 39, 41, 43, 47, 49
  • Comes complete with Necessary Screws, Washers & handles
ROTARY TABLE TILTING-4-3/8

ROTARY TABLE TILTING-4-3/8

In Stock
  • Can be Tilted from 0° to 180°.
  •  Engage & Disengage Function for manual indexing.
Universal sheet metal machine – Rolling, Bending & Cutting 3 in 1

Universal sheet metal machine – Rolling, Bending & Cutting 3 in 1

In Stock
  • 3 x  Rollers including rear pinch roll and top slip out roll.
  • 4 x holes for locking the equipment.
  • Segmented press brake tooling for box and pan folding up to 90°.
Metal Brake Bender Vise Mount

Metal Brake Bender Vise Mount

In Stock
  • The bending jaw is equipped with magnets that ensure a secure hold in the vice. This keeps the jaw stable during the bending process and ensures a controlled and safe working environment
  • Bending jaw offers the possibility to perform precise bends on materials such as mild steel.
  • With a maximum bending capacity of 3 mm, you can achieve accurate and professional results
Mini rolling & bending machine

Mini rolling & bending machine

In Stock
  • An easier-to-use tool for making perfect bends in ship model planking.
  • Works on wood strips up to 2-1/4 inches wide and 1/8 inch thick
  • It will also make smooth, no kink curves in plastic and metal strip stock and in 1/16 inch, 3/32 inch and 1/8 inch tubing and soft wire.
Mini Bending Brake

Mini Bending Brake

In Stock
  • Mini Sheet metal bender & Press bending brake for brass or other light sheet metals.
  • Makes bends up to 90 degrees (depending on how far you tighten the press screws).
  • Can also be used on plastic.
Mini Universal Bender

Mini Universal Bender

In Stock
  • Forms wire, flat metal and tubing into clamps, handle brackets, hooks, coils and more
  • Make sharp angle bends in wire and rod
  • Includes circle pins for 3/16", 1/4", 1/2" dia, circle, 1" diacircle die, form pin follower, sharp angle die, gauge and handle
Vice For Rotary Table

Vice For Rotary Table

In Stock
4″ Rotary Vice for 100mm Rotary Table Round vice ideally suited for 4″ (100mm) rotary tables. It is supplied with fixing bolts and Handle Its Jaw opening 40mm, Jaw width 77mm, Jaw height 20mm.
Rapid Indexer Horizontal & Vertical

Rapid Indexer Horizontal & Vertical

In Stock
  • Rapid Indexer With Chuck
  • Gear Ratio 24:1
  • Manufacturing from closed grained cast iron.
Rotary Table – Tilting MT-2, 4″/100mm

Rotary Table – Tilting MT-2, 4″/100mm

In Stock
  • Can be Tilted from 0 to 180°.
  • Engage & Disengage Function for manual indexing
Rotary Table Horizontal & Vertical – 6″/150mm

Rotary Table Horizontal & Vertical – 6″/150mm

In Stock
Engage & Disengage Function for manual indexing.
Rotary Table 4″/ 100MM

Rotary Table 4″/ 100MM

In Stock
  • High Precision Quality Made Low Profile Rotary Table
  • Center Height in vertical position: 2-1/16" (50mm approx) Hand wheel is graduated in divisions of 10 min & can be set to zero.
  • Can be mounted both in Horizontal & vertical position
Rotary Table – Tilting 3″/75mm

Rotary Table – Tilting 3″/75mm

In Stock
  • Precision Mini Rotary Table 3" 75mm is manufactured from Seasoned casting.
  • Precisely maintained Chuck Run Out and Botton Surface for accurate work.
  • 4 T Slots for fixing work can be used with Clamping kit.
Dividing Plate Set For Rotary Table

Dividing Plate Set For Rotary Table

In Stock
Set of 3 dividing plates designed to fit our 4″ Rotary Table Tilting Type. Centre Hole is locating on the Plate for mounting on the Rotary Table

Filter Products

Categories

Product Status