Filter
Sort:
Show:
MINI VERTICAL SLIDE

MINI VERTICAL SLIDE

In Stock
  • Suitable for Bench Lathes upto 150mm Swing
  • Vertical Travel 70mm
  • Base Dimension: 50x55mm
  • Sliding Table: 90x50mm
  • Dial Graduated to 0-50
  • High Grade casting and Smooth Finish.
LIVE TAILSTOCK

LIVE TAILSTOCK

In Stock
  • Manufactured from high grade steel hardened point hardened point to impart extra strength.
  • These have single row bearings & Taper Rolling to take up radial load and thrust bearings to absorb axial loads.
  • 3 jaws self centering 50mm lathe chuck.
LIVE CENTERS HIGH PRECISION (EXTENDED NOZZLE)

LIVE CENTERS HIGH PRECISION (EXTENDED NOZZLE)

In Stock
  • Body is constructed from hardened and ground steel.
  • eccentricity between .005 - .010
  • Nozzle is assembled with double angular contact bearing.
  • Needle roller bearing at the end of the points in the shank.
BEVEL REVOLVING TUBE PIPE CENTERS

BEVEL REVOLVING TUBE PIPE CENTERS

In Stock
  • Machining Pipes And Similar Hollow Shaft Materials With a High Thrust Capacity.
  • Bevel Section Is Ground After assembly Running In Its Own Bearing.
  • Designed to hold hollow & pipe Works.
  • Manufactured from heat treated high carbon Alloy steel.
LATHE CENTER / DEAD CENTER – FULL

LATHE CENTER / DEAD CENTER – FULL

In Stock
  • Solid Construction WIth No Moving Parts And Fully Hardened.
  • Tip Hardened to 60-63 HRC And Included Angle At Tip is 60°.
  • Hardened High Speed Centers Ensure Long Life.
  • Carbide Tipped Centers Give Longer Tool Life & Require Less Grinding.
  • Covers Widest Range Of Center Hole Sizes.
  • Eliminates Special Centers.
LATHE CENTER / DEAD CENTER – HALF

LATHE CENTER / DEAD CENTER – HALF

In Stock
  • Solid Construction With No Moving Parts And Fully Hardened.
  • Tip Hardened to 60-63 HRC And Included Angle At Tip is 60°.
  • Hardened High Speed Centers Ensure Long Life.
REVOLVING CENTER 7 TIPS

REVOLVING CENTER 7 TIPS

In Stock
  • Set Contents - 5 Diff. live centers, 1 Pipe Center, 1 Female Center & 1 Ejecting Key.
  • Assembled with three bearings.
  • Ecentricity between .005 - .010 μ
  • Body is constructed from hardened and ground steel.
  • Widely used by Modelmakers & Woodworkers on mini lathes.
MINI LIVE CENTERS

MINI LIVE CENTERS

In Stock
  • Manufactured from Case Hardened Steel.
  • GRC-7887 is suitable for EMCO Compact & Similar Sized Lathes
REVOLVING CENTER SLIM BODY / LIVE CENTER SLIM BODY

REVOLVING CENTER SLIM BODY / LIVE CENTER SLIM BODY

In Stock
  • High Precision Bearings.
  • Ultra Slim Design of the body.
  • Slim Nozzle.
  • Three-way running in ball bearings for highest precision.
  • Manufactured from hardened steel.
REVOLVING CENTER / LIVE CENTER

REVOLVING CENTER / LIVE CENTER

In Stock
  • Manufactured from high grade steel hardened point to impart extra strength.
  • Hardened & Ground Steel With 60° Tip Angle.
  • Recommended for use upto 1500 r.p.m
ER Collet Sets

ER Collet Sets

In Stock
  • ER collets are cylindrical in shape and consist of a threaded outer surface that allows them to be screwed into a corresponding collet chuck or tool holder. They have multiple slits or slots along their length, which enable them to compress when tightened, effectively clamping onto the tool shank.
Knurling Tool Holder Linear

Knurling Tool Holder Linear

In Stock
  • Knurling Tool Holders are manufactured from fine quality steel & finely blackodized.
  • Knurling Tool Holders are ideal tool for numerous knurling applications.
Quick Acting Knurling Tool

Quick Acting Knurling Tool

In Stock
  • Hardened Steel Knurls for longer life comes fitted in Knurling holders.
  • Knurling pressure is absorbed between two knurls.
  • Depth of knurling impression can be pre-set for production work before start of operation
Knurling Tool Holder With 3 Interchangeable Heads

Knurling Tool Holder With 3 Interchangeable Heads

In Stock
  • These Knurling Tool Holders Have 3 Interchangeable Heads for Center Height Upto 12 & 16mm.
  • These Knurling Tool Holders usually comes with alloy steel knurls.
  • These Knurling Tool Holders can also be supplied with high speed steel knurls.
Spare Knurling Knurls

Spare Knurling Knurls

In Stock
  • Spare knurls can be supplied both in High Speed Steel Material for Longer life & Carbon Steel Knurls
Knurling Tool Holder Revolving Head 3 Knurls

Knurling Tool Holder Revolving Head 3 Knurls

In Stock
  • With the revolving head it prevents the wastage of time in changing knurls every time when required.
  • Three knurls are mounted on a single tool which gives high productivity.
  • Provides ease of use to operator with its revolving head.

Filter Products

Categories

Product Status