Filter
Sort:
Show:
VICE MOUNTED BENDER

VICE MOUNTED BENDER

In Stock
  • The primary purpose of a vice-mounted wire bender is to bend wires accurately and consistently. It is often used in metalworking, jewelry making, and other crafts where precise wire shapes are required.
  • Design: These benders are designed to be mounted on a vice, providing stability and control during the bending process. The vice holds the wire securely in place while the bending mechanism shapes the wire   according to the desired pattern or angle.
  • Users typically insert the wire into the bender and secure it in the vice. The user then adjusts the position of the wire and applies pressure to create the desired bend.
THICKNESS GAUGES / FEELER GUAGES

THICKNESS GAUGES / FEELER GUAGES

In Stock
CENTER GAUGE

CENTER GAUGE

In Stock
  • Use to grind and position thread cutting tool on a lathe.
  • Hardened with lapped edges and notches.
MINI TURNING TOOL – 3 PC SET

MINI TURNING TOOL – 3 PC SET

In Stock
  • Manufactured from high-grade steel, fully hardened.
  • Supplied with suitable allen keys & nuts but without tool bit
RADIUS TURNING ATTACHMENT

RADIUS TURNING ATTACHMENT

In Stock
  • Cuts ball-shaped objects or turns a radius on the end of a work piece.
  • Swing the handle to rotate the cutter.
  • Turn up to 3/4" (20mm) diameter.
  • High Speed Steel cutter included
TAPER TURNING ATTACHMENT

TAPER TURNING ATTACHMENT

In Stock
  • Easiest Way to To do Taper Turning , without offsetting the Tailstock.
  • Adjustable Screws on Both Sides for Fine Adjustments.
  • Calibrated 6° to the left or right.
ROUND TOOL HOLDERS – DOUBLE ENDED

ROUND TOOL HOLDERS – DOUBLE ENDED

In Stock
  • A useful Tool to Hold Round Tool Steel
  • 1 Holder Allows 2 Different Sizes of Round Steel to Hold
MINI TURNING TOOL HOLDER SET

MINI TURNING TOOL HOLDER SET

In Stock
  • This Set Includes Three Pcs Of Turning Tool Holders ; Left Right & Straight.
  • Supplied With 3 Pcs of HSS Square Toolbit 1/8" / 3mm x 1" / 25mm.
TURNING TOOL HOLDER – AMERICAN PATTERN

TURNING TOOL HOLDER – AMERICAN PATTERN

In Stock
  • Supplied in three shapes; Straight, Left & Right Hand.
  • Manufactured from fine quality special steel & finely blackodized.
TURNING TOOL HOLDERS FOR CARBIDE TOOLS

TURNING TOOL HOLDERS FOR CARBIDE TOOLS

In Stock
  • Supplied in three shapes; Straight, Left & Right Hand.
  • Manufactured from fine quality special steel.
  • Supplied with one key & bolt but without tool bit.
TURNING TOOL HOLDERS ADJUSTABLE

TURNING TOOL HOLDERS ADJUSTABLE

In Stock
  • These tool holders offer maximum effectiveness by means of a carefully machined groove with relieved corners which enables the tool bit to rest on a really flat surface.
  • Supplied with one key & bolt but without tool bit.
Screw pitch gauge

Screw pitch gauge

In Stock
  • Constructed from good quality steel.
  • Each and every leaf is properly marked with size.
  • Packed in Attractive PVC Jacket.
  • Used to check the threads of the screws.
Diamond Weight Gauge with Block

Diamond Weight Gauge with Block

In Stock
  • This gauge is ideal if you need to know accurately a diamond size.
  • It is very easy to use by placing the gauge at side and then at the top of diamond.
  • Diamond weight gauge is with reference booklet.
  • The size can then be found by checking the reference booklet.
  • Width and depth are measured with caliper and compared with measurements in table.
Marking Gauge

Marking Gauge

In Stock
  • Graduations are properly etched to give accurate measurements.
  • Scale manufactured of stainless steel .
  • Marking edge with metric graduations.
Diamond Thickness Gauge

Diamond Thickness Gauge

In Stock
  • Spring Action between both the legs.
  • Very useful tool for measuring the thickness of small things.
Twist Drill Gauge

Twist Drill Gauge

In Stock
  • Manufactured from fine quality stainless steel.
  • Polished finish.
  • Used for twist drills with an angle of 118° up to length of (50mm)/2"

Filter Products

Categories

Product Status