Filter
Sort:
Show:
SINE VICE -PIN TYPE

SINE VICE -PIN TYPE

In Stock
  • Manufactured from Hardened & Ground Tool Steel .
  • Mounted on Hardened, ground rollers the vice can be inclined in the position with the help of side strap clamp.
  • The recess of 1mm depth is made in base plate for minute angle adjustment
TOOL MAKERS STEEL VICE -SCREW LESS TYPE

TOOL MAKERS STEEL VICE -SCREW LESS TYPE

In Stock
  • Hardened & Ground Steel Vice .
  • The rapid positioning notched allow the vice to be locked at any desired  position by allen key .
  • V-Grooves in jaws facilitates holding of round jobs
TOOL MAKERS STEEL VICE -SCREW TYPE

TOOL MAKERS STEEL VICE -SCREW TYPE

In Stock
  • Manufactured from selected tool steel hardened 55-60 hrc.
  • Accuracy for squareness, flatness & parallelism within 0.010mm
  • Wear plate at bottom to prevent lifting of jaw.
HIGH-PRECISION GRINDING AND CONTROL VISE

HIGH-PRECISION GRINDING AND CONTROL VISE

In Stock
A Very High Precision Grinding Vice for Accurate Grinding Jobs. Tool steel, through-hardened, fully precision-ground.
SAW & GEAR CUTTER HOLDER

SAW & GEAR CUTTER HOLDER

In Stock
SAW HOLDER- MINI

SAW HOLDER- MINI

In Stock
Supplied in grinded plus black epoxy finish
SLITTING SAW ARBOR

SLITTING SAW ARBOR

In Stock
  • Slitting Saw Arbor similar to Circular Saw Blade with teeth around the circumference.
  • Use for deep Slotting.
  • Use for Sinking in Cuts
SAW HOLDER -TAPPER SHANK

SAW HOLDER -TAPPER SHANK

In Stock
  • Accepts Saw Blades From 1/2" till 1".
  • Blades are Firmly secured in position with hex head counter screw.
  • Supplied in a combination of grounded & black epoxy finish.
SAW HOLDER CIRCULAR

SAW HOLDER CIRCULAR

In Stock
  • Spring Load Mechanism, with hardened shank.
  •  Accepts saw blades from ½” till 1” (12/16/22/27mm)
STUB MILLING ARBOR- FOR GEAR CUTTER

STUB MILLING ARBOR- FOR GEAR CUTTER

In Stock
  • Gives Rigidity & Stability needed in Milling Operations.
  • Available in MT2/MT3/MT4/ Three Versatile Design.
  • Each stub milling arbor has its own significance
BORING BAR WITH HOLDER

BORING BAR WITH HOLDER

In Stock
  • Manufactured from good quality tool steel
  • Supplied with 1 Allen key
  • Tool bit not included
DRILL CHUCK ARBOR

DRILL CHUCK ARBOR

In Stock
  • Drill chuck arbors are double ended steel shafts.
  • One end is machined to fit a machine spindle and the other fits into the back of a drill chuck.
OPEN END SLEEVE WITH EXTRACTOR – AS PER DIN 228

OPEN END SLEEVE WITH EXTRACTOR – AS PER DIN 228

In Stock
  • Hardened & ground both internal & external
EXTENSION SLEEVES-AS PER DIN 2187

EXTENSION SLEEVES-AS PER DIN 2187

In Stock
  • Manufactured From Case Hardened Steel.
  • Used For Extending The Taper Shank Tools.
  • Precision Ground From Both Inside & Outside In "A" Grade.
 
VALVE SEAT & FACE CUTTER SETS – PROFESSIONAL- 45°

VALVE SEAT & FACE CUTTER SETS – PROFESSIONAL- 45°

In Stock
  • Manufactured from high grade carbon steel, properly hardened & tempered.
  • The cutting edge of all the cutters are accurately ground for best results.
REVOLVING TAILSTOCK ARBOR

REVOLVING TAILSTOCK ARBOR

In Stock
  • It is used assist small diameter of work at the tailstock where revolving  center is not practical.

Filter Products

Categories

Product Status