Filter

Showing 1–16 of 41 resultsSorted by latest

Sort:
Show:
Tail Stock Die Holder Set – Deluxe or Pin Type (Inches)

Tail Stock Die Holder Set – Deluxe or Pin Type (Inches)

In Stock
Lathe Tail Stock Tap & Die Holder Set of 7 pcs

Lathe Tail Stock Tap & Die Holder Set of 7 pcs

In Stock
Die Holder Straight Shank

Die Holder Straight Shank

In Stock
Spare Knurls

Spare Knurls

In Stock
  • All knurls are produced from M2 (High Speed Steel) and hardened to 62 HRC. All knurls are tested to assure work of uniform precision. Manufacturing tolerances are highly precise for knurl thickness and hole diameter. The hole is always concentric and the patterns on the knurls are created under rolled cut method. We offer knurls of straight pattern, Left hand spiral, Right hand spiral and Cross knurl.
Fly Cutter Tool Holders-Taper Shanks

Fly Cutter Tool Holders-Taper Shanks

In Stock
  • Fly cutters usually has two cutting heads and it is able to cut with a constant depth to face any surface to obtain a uniform surface.
  • Used in automobile industry for various facing jobs. In motor industry are used extensively. In almost all occasions they are used for the facing.
Fly Tool Cutter Set – Round Tool Bits

Fly Tool Cutter Set – Round Tool Bits

In Stock
  • Manufactured from fine quality toolsteel.
  • Useful for boring through rough holes with suitable toolbit.
Fly Tool Cutters -With Suitable Tool Bits

Fly Tool Cutters -With Suitable Tool Bits

In Stock
  • Manufactured from fine quality tool steel.
  • Useful for boring through rough holes with suitable toolbit.
Fly Cutter

Fly Cutter

In Stock
  • Designed Specifically for Metal Facing And Surface ,Providing a smooth and Consistent Finish.
  • Carbide Insert Included With Tool Holder.
DEAD CENTERS

DEAD CENTERS

In Stock
  • Manufactured from high carbon steel fully hardened and precision ground to DIN standards of 806 having a T.I.R. of + / - 2.5 microns. Available in two types full and half dead centers, with carbide tips and HSS tips . The carbide/ HSS tips are brazed into the socket with a close tolerance for maximum strength
Revolving Center 7 Tips

Revolving Center 7 Tips

In Stock
  • Set Contents – 5 Diff. live centers, 1 Pipe Center, 1 Female Center & 1 Ejecting Key.
  • Assembled with three bearings.
REVOLVING CENTER SLIM BODY / LIVE CENTER SLIM BODY

REVOLVING CENTER SLIM BODY / LIVE CENTER SLIM BODY

In Stock
  • High Precision Bearings.
  • Ultra Slim Design of the body.
  • Slim Nozzle.
Revolving Center / Live Center

Revolving Center / Live Center

In Stock
  • Manufactured from high grade steel hardened point to impart extra strength.
  • Hardened & Ground Steel With 60° Tip Angle.
  • Recommended for use upto 1500 r.p.m.
Mini Live Centers

Mini Live Centers

In Stock
  • Manufactured from Case Hardened Steel.
  • Eccentricity between 5-8 Microns.
  • GRC-7887 is suitable for EMCO Compact & Similar Sized Lathes.
Live Tailstock

Live Tailstock

In Stock
  •  Manufactured from high grade steel hardened point to impart extra strength.
  •  These have single row bearings & Taper rolling to take up radial load and thrust bearings to absorb axial loads.
  •  3 Jaw self centering 50mm Lathe Chuck.
LIVE CENTERS HIGH PRECISION (STANDARD NOZZLE)

LIVE CENTERS HIGH PRECISION (STANDARD NOZZLE)

In Stock
  • Body is Constructed from Hardened and Ground Steel
  • Ecentricity Between .005 – .010 μ
  • Nozzle is Assembled with Double Angular Contact Bearing
Live Centers High Precision (Extended Nozzle)

Live Centers High Precision (Extended Nozzle)

In Stock
  • Solid Construction With No Moving Parts And Fully Hardened.
  • Tip Hardened to 60-63 HRC And Included Angle At Tip is 60°.

Filter Products

Categories

Product Status