Filter

Showing 1–16 of 28 resultsSorted by latest

Sort:
Show:
Spare Knurls

Spare Knurls

In Stock
  • All knurls are produced from M2 (High Speed Steel) and hardened to 62 HRC. All knurls are tested to assure work of uniform precision. Manufacturing tolerances are highly precise for knurl thickness and hole diameter. The hole is always concentric and the patterns on the knurls are created under rolled cut method. We offer knurls of straight pattern, Left hand spiral, Right hand spiral and Cross knurl.
Vernier Caliper Round Jaws Brass

Vernier Caliper Round Jaws Brass

In Stock
  • For accurately measuring beads, jump rings, and wire diameters without scratching the material.
  • Used by students and researchers for precise dimensional readings of small, delicate components.
Vernier Caliper Brass

Vernier Caliper Brass

In Stock
  • Measures the dimensions of gemstones, beads, and other jewelry components without scratching them.
  • Ideal for hobbyists and craftspeople who need to measure components like small screws, lenses, and tubing.
Tire Tread Feeler Gauge – Single Point Brass

Tire Tread Feeler Gauge – Single Point Brass

In Stock
  • The primary application is to check for uniform or excessive tread wear on passenger cars, motorcycles, and trucks.
  • Comparing the tread depth to legal minimums helps ensure vehicle safety, as worn-out tires lose traction, especially in wet conditions.
Tire Tread Feeler Gauge – Double Point Brass

Tire Tread Feeler Gauge – Double Point Brass

In Stock
  • As a solid piece, a brass tread gauge is highly resistant to breaking or bending, ensuring a long service life. 
  • A double-point brass tire tread feeler gauge is a manual tool used to measure the remaining tread depth on tires.
Profile Depth Gauge Brass

Profile Depth Gauge Brass

In Stock
  • Many brass profile depth gauges are specifically designed for checking tyre tread depth. The gauge measures the distance from the top of the tread to the base of the groove, ensuring tires meet safety standards.
DEAD CENTERS (PER DIN 806)

DEAD CENTERS (PER DIN 806)

In Stock
  • Manufactured from high carbon steel fully hardened and precision ground to DIN standards of 806 having a T.I.R. of + / - 2.5 microns. Available in two types full and half dead centers, with carbide tips and HSS tips . The carbide/ HSS tips are brazed into the socket with a close tolerance for maximum strength
HIGH PRECISION LIVE CENTERS FOR CNC LATHES HEAD LOW BODY

HIGH PRECISION LIVE CENTERS FOR CNC LATHES HEAD LOW BODY

In Stock
  • This live center is available in two styles , one with a standard body and three interchangeable tips consisting of a tool steel point of 60 degree, a carbide point of 60 degree & a 60 degree extended point. The second type has a low body with same tips as the standard body live center.
HIGH PRECISION LIVE CENTERS FOR CNC LATHES HEAD LIVE CENTER

HIGH PRECISION LIVE CENTERS FOR CNC LATHES HEAD LIVE CENTER

In Stock
  • This live center is available in two styles , one with a standard body and three interchangeable tips consisting of a tool steel point of 60 degree, a carbide point of 60 degree & a 60 degree extended point. The second type has a low body with same tips as the standard body live center.
HIGH PRECISION LIVE CENTERS FOR CNC LATHES LOW BODY EXTENDED POINT

HIGH PRECISION LIVE CENTERS FOR CNC LATHES LOW BODY EXTENDED POINT

In Stock
  • High precision live centers with small bodies having an extended point of 60 degree . These centers have multiple roller bearings and thrust bearings fitted in the body as well as a thrust bearing at the end of the shank ensuring long life as well as smooth operation. Bearings are protected by a neoprene seal for longer life.
HIGH PRECISION LIVE CENTERS FOR CNC LATHES LOW BODY

HIGH PRECISION LIVE CENTERS FOR CNC LATHES LOW BODY

In Stock
  • Precision Live centers having small bodies useful on all CNC lathes, has a point angle of 60 degrees. Fitted with multiple roller bearings and thrust bearing at the end of the points in the shank.
HIGH PRECISION LIVE CENTERS FOR CNC LATHES EXTENDED POINT

HIGH PRECISION LIVE CENTERS FOR CNC LATHES EXTENDED POINT

In Stock
  • High precision live centers with extended point angle of 60 degree with double angular contact bearing, thrust bearing and needle roller bearing at the end of point in shank. Concentricity within 0.005mm.
HIGH PRECISION LIVE CENTERS FOR CNC LATHES

HIGH PRECISION LIVE CENTERS FOR CNC LATHES

In Stock
  • This center can be used on all CNC Lathes, has a point angle of 60 degrees with double angular contact bearing, thrust bearing and needle roller bearing at the end of point in the shank. Available in two types with a carbide point and with a tool steel point. Concentricity within 0.005mm.
STANDARD POINT LIVE CENTER

STANDARD POINT LIVE CENTER

In Stock
  • This center has been made of hardened steel and is precision ground for accuracy. High quality bearings assure smooth movement at high speed. Concentricity of + /- 0.020mm
REVERSIBLE TAPPING ATTACHMENT

REVERSIBLE TAPPING ATTACHMENT

In Stock
  • A versatile attachment suitable use on drilling machines for drilling thru and blind holes with standard taps. The Automatic reverse mechanism has a double back out speed and an adjustable friction clutch to avoid tap breakage.
KNURLING KIT WITH FIVE KNURLS

KNURLING KIT WITH FIVE KNURLS

In Stock

Features

  • Knurling kit with five knurls Straight Coarse, Fine, Cross Fine, Medium, Coarse and with spare pins. Single Knurling holder

Filter Products

Categories

Product Status