Filter

Showing 1–16 of 25 resultsSorted by latest

Sort:
Show:
Fly Cutter Tool Holders-Taper Shanks

Fly Cutter Tool Holders-Taper Shanks

In Stock
  • Fly cutters usually has two cutting heads and it is able to cut with a constant depth to face any surface to obtain a uniform surface.
  • Used in automobile industry for various facing jobs. In motor industry are used extensively. In almost all occasions they are used for the facing.
Fly Tool Cutter Set – Round Tool Bits

Fly Tool Cutter Set – Round Tool Bits

In Stock
  • Manufactured from fine quality toolsteel.
  • Useful for boring through rough holes with suitable toolbit.
Fly Tool Cutters -With Suitable Tool Bits

Fly Tool Cutters -With Suitable Tool Bits

In Stock
  • Manufactured from fine quality tool steel.
  • Useful for boring through rough holes with suitable toolbit.
Fly Cutter

Fly Cutter

In Stock
  • Designed Specifically for Metal Facing And Surface ,Providing a smooth and Consistent Finish.
  • Carbide Insert Included With Tool Holder.
Angle Degree Protractors (0 To 180°)

Angle Degree Protractors (0 To 180°)

In Stock
  • Stainless Steel & polished body.
  • Graduations are properly etched to give accurate measurements.
  • Move from 0 to 180&deg.
Steel Protractor

Steel Protractor

In Stock
  • Measures angles from 0-180°.
  • With Adjustable Screw.
  • Satin Chrome Finish.
DEAD CENTERS

DEAD CENTERS

In Stock
  • Manufactured from high carbon steel fully hardened and precision ground to DIN standards of 806 having a T.I.R. of + / - 2.5 microns. Available in two types full and half dead centers, with carbide tips and HSS tips . The carbide/ HSS tips are brazed into the socket with a close tolerance for maximum strength
Revolving Center 7 Tips

Revolving Center 7 Tips

In Stock
  • Set Contents – 5 Diff. live centers, 1 Pipe Center, 1 Female Center & 1 Ejecting Key.
  • Assembled with three bearings.
REVOLVING CENTER SLIM BODY / LIVE CENTER SLIM BODY

REVOLVING CENTER SLIM BODY / LIVE CENTER SLIM BODY

In Stock
  • High Precision Bearings.
  • Ultra Slim Design of the body.
  • Slim Nozzle.
Revolving Center / Live Center

Revolving Center / Live Center

In Stock
  • Manufactured from high grade steel hardened point to impart extra strength.
  • Hardened & Ground Steel With 60° Tip Angle.
  • Recommended for use upto 1500 r.p.m.
Mini Live Centers

Mini Live Centers

In Stock
  • Manufactured from Case Hardened Steel.
  • Eccentricity between 5-8 Microns.
  • GRC-7887 is suitable for EMCO Compact & Similar Sized Lathes.
Live Tailstock

Live Tailstock

In Stock
  •  Manufactured from high grade steel hardened point to impart extra strength.
  •  These have single row bearings & Taper rolling to take up radial load and thrust bearings to absorb axial loads.
  •  3 Jaw self centering 50mm Lathe Chuck.
LIVE CENTERS HIGH PRECISION (STANDARD NOZZLE)

LIVE CENTERS HIGH PRECISION (STANDARD NOZZLE)

In Stock
  • Body is Constructed from Hardened and Ground Steel
  • Ecentricity Between .005 – .010 μ
  • Nozzle is Assembled with Double Angular Contact Bearing
Live Centers High Precision (Extended Nozzle)

Live Centers High Precision (Extended Nozzle)

In Stock
  • Solid Construction With No Moving Parts And Fully Hardened.
  • Tip Hardened to 60-63 HRC And Included Angle At Tip is 60°.
Test Bar / Lathe Aligning Mandrels

Test Bar / Lathe Aligning Mandrels

In Stock
  • A test bar, typically made of hardened alloy steel, is inserted between the lathe’s headstock and tailstock centers. 
  • The bar is designed to have a precise straightness and parallel surfaces, often within 0.0001″ or 0.0002″. 
Revolving Tube Centers

Revolving Tube Centers

In Stock
  • Machining Pipes And Similar Hollow Shaft Materials With a High Thrust Capacity.
  • Bevel Section Is Ground After assembly Running In Its Own Bearing.

Filter Products

Categories

Product Status