Filter

Showing 1–16 of 60 resultsSorted by latest

Sort:
Show:
Tail Stock Die Holder Set – Deluxe or Pin Type (Inches)

Tail Stock Die Holder Set – Deluxe or Pin Type (Inches)

In Stock
Lathe Tail Stock Tap & Die Holder Set of 7 pcs

Lathe Tail Stock Tap & Die Holder Set of 7 pcs

In Stock
Die Holder Straight Shank

Die Holder Straight Shank

In Stock
Spare Knurls

Spare Knurls

In Stock
  • All knurls are produced from M2 (High Speed Steel) and hardened to 62 HRC. All knurls are tested to assure work of uniform precision. Manufacturing tolerances are highly precise for knurl thickness and hole diameter. The hole is always concentric and the patterns on the knurls are created under rolled cut method. We offer knurls of straight pattern, Left hand spiral, Right hand spiral and Cross knurl.
Sensitive Drill Attachment

Sensitive Drill Attachment

In Stock
Radius Turning attachment

Radius Turning attachment

In Stock

Features

  • Easily Cuts ball-shaped objects or turns a radius on the end of a work piece.
  • Swing the handle to rotate the cutter.
Ball Turning Attachment -TNMG Insert

Ball Turning Attachment -TNMG Insert

In Stock

Features

  • Ball Turning Attachment uses CNMG Insert to quickly Turn Balls & Cones
  • Designed for the Lathes having Center Height 3-1/2″
Taper Turning Attachment

Taper Turning Attachment

In Stock
  • Easiest Way to To do Taper Turning , without offsetting the Tailstock.
  • Adjustable Screws on Both Sides for Fine Adjustments.
Taper Turning Attachment With Revolving Center

Taper Turning Attachment With Revolving Center

In Stock
  • Slide Can be Shifted 25mm Left & Right,
  • 1 Handle Rotation will off set the attachment by 1mm.
Turret Head Quick Change Tail Stock-3 Head

Turret Head Quick Change Tail Stock-3 Head

In Stock
  • 1 x Drill Sleeve MT2-3.
  • 1x13mm drill chuck with key.
  • 1xDie holder 13/16″.
  • 1xLive Center
Turret Head Quick Change Tail Stock -4 Head

Turret Head Quick Change Tail Stock -4 Head

In Stock
DEAD CENTERS

DEAD CENTERS

In Stock
  • Manufactured from high carbon steel fully hardened and precision ground to DIN standards of 806 having a T.I.R. of + / - 2.5 microns. Available in two types full and half dead centers, with carbide tips and HSS tips . The carbide/ HSS tips are brazed into the socket with a close tolerance for maximum strength
TAPER & PARALLEL TEST BARS / MANDRELS

TAPER & PARALLEL TEST BARS / MANDRELS

In Stock
  • Manufactured to high precision from alloy steel and heat treated to a hardness of 62HRC +/- 2 HRC . Each piece is inspected for concentricity within 0.0001" and parallelism. Useful for alignment test between centers as well as in morse taper spindles.
TAPER ADAPTERS

TAPER ADAPTERS

In Stock
  • Manufactured to precision from case hardened steel ( 20 Mn Cr5/ SAE 8620 ) to a hardness of 56 +/- 2 HRC . Concentricity within 0.015mm Internal taper as per DIN 228 and external taper R8.
Revolving Center 7 Tips

Revolving Center 7 Tips

In Stock
  • Set Contents – 5 Diff. live centers, 1 Pipe Center, 1 Female Center & 1 Ejecting Key.
  • Assembled with three bearings.
REVOLVING CENTER SLIM BODY / LIVE CENTER SLIM BODY

REVOLVING CENTER SLIM BODY / LIVE CENTER SLIM BODY

In Stock
  • High Precision Bearings.
  • Ultra Slim Design of the body.
  • Slim Nozzle.

Filter Products

Categories

Product Status