Filter

Showing 1–16 of 39 resultsSorted by latest

Sort:
Show:
Tail Stock Die Holder Set – Deluxe or Pin Type (Inches)

Tail Stock Die Holder Set – Deluxe or Pin Type (Inches)

In Stock
Lathe Tail Stock Tap & Die Holder Set of 7 pcs

Lathe Tail Stock Tap & Die Holder Set of 7 pcs

In Stock
Die Holder Straight Shank

Die Holder Straight Shank

In Stock
Spare Knurls

Spare Knurls

In Stock
  • All knurls are produced from M2 (High Speed Steel) and hardened to 62 HRC. All knurls are tested to assure work of uniform precision. Manufacturing tolerances are highly precise for knurl thickness and hole diameter. The hole is always concentric and the patterns on the knurls are created under rolled cut method. We offer knurls of straight pattern, Left hand spiral, Right hand spiral and Cross knurl.
DEAD CENTERS

DEAD CENTERS

In Stock
  • Manufactured from high carbon steel fully hardened and precision ground to DIN standards of 806 having a T.I.R. of + / - 2.5 microns. Available in two types full and half dead centers, with carbide tips and HSS tips . The carbide/ HSS tips are brazed into the socket with a close tolerance for maximum strength
TAPER & PARALLEL TEST BARS / MANDRELS

TAPER & PARALLEL TEST BARS / MANDRELS

In Stock
  • Manufactured to high precision from alloy steel and heat treated to a hardness of 62HRC +/- 2 HRC . Each piece is inspected for concentricity within 0.0001" and parallelism. Useful for alignment test between centers as well as in morse taper spindles.
TAPER ADAPTERS

TAPER ADAPTERS

In Stock
  • Manufactured to precision from case hardened steel ( 20 Mn Cr5/ SAE 8620 ) to a hardness of 56 +/- 2 HRC . Concentricity within 0.015mm Internal taper as per DIN 228 and external taper R8.
Revolving Center 7 Tips

Revolving Center 7 Tips

In Stock
  • Set Contents – 5 Diff. live centers, 1 Pipe Center, 1 Female Center & 1 Ejecting Key.
  • Assembled with three bearings.
REVOLVING CENTER SLIM BODY / LIVE CENTER SLIM BODY

REVOLVING CENTER SLIM BODY / LIVE CENTER SLIM BODY

In Stock
  • High Precision Bearings.
  • Ultra Slim Design of the body.
  • Slim Nozzle.
Revolving Center / Live Center

Revolving Center / Live Center

In Stock
  • Manufactured from high grade steel hardened point to impart extra strength.
  • Hardened & Ground Steel With 60° Tip Angle.
  • Recommended for use upto 1500 r.p.m.
Mini Live Centers

Mini Live Centers

In Stock
  • Manufactured from Case Hardened Steel.
  • Eccentricity between 5-8 Microns.
  • GRC-7887 is suitable for EMCO Compact & Similar Sized Lathes.
Live Tailstock

Live Tailstock

In Stock
  •  Manufactured from high grade steel hardened point to impart extra strength.
  •  These have single row bearings & Taper rolling to take up radial load and thrust bearings to absorb axial loads.
  •  3 Jaw self centering 50mm Lathe Chuck.
LIVE CENTERS HIGH PRECISION (STANDARD NOZZLE)

LIVE CENTERS HIGH PRECISION (STANDARD NOZZLE)

In Stock
  • Body is Constructed from Hardened and Ground Steel
  • Ecentricity Between .005 – .010 μ
  • Nozzle is Assembled with Double Angular Contact Bearing
Live Centers High Precision (Extended Nozzle)

Live Centers High Precision (Extended Nozzle)

In Stock
  • Solid Construction With No Moving Parts And Fully Hardened.
  • Tip Hardened to 60-63 HRC And Included Angle At Tip is 60°.
Test Bar / Lathe Aligning Mandrels

Test Bar / Lathe Aligning Mandrels

In Stock
  • A test bar, typically made of hardened alloy steel, is inserted between the lathe’s headstock and tailstock centers. 
  • The bar is designed to have a precise straightness and parallel surfaces, often within 0.0001″ or 0.0002″. 
Revolving Tube Centers

Revolving Tube Centers

In Stock
  • Machining Pipes And Similar Hollow Shaft Materials With a High Thrust Capacity.
  • Bevel Section Is Ground After assembly Running In Its Own Bearing.

Filter Products

Categories

Product Status