Filter

Showing 1–16 of 17 resultsSorted by latest

Sort:
Show:
DEAD CENTERS

DEAD CENTERS

In Stock
  • Manufactured from high carbon steel fully hardened and precision ground to DIN standards of 806 having a T.I.R. of + / - 2.5 microns. Available in two types full and half dead centers, with carbide tips and HSS tips . The carbide/ HSS tips are brazed into the socket with a close tolerance for maximum strength
TAPER & PARALLEL TEST BARS / MANDRELS

TAPER & PARALLEL TEST BARS / MANDRELS

In Stock
  • Manufactured to high precision from alloy steel and heat treated to a hardness of 62HRC +/- 2 HRC . Each piece is inspected for concentricity within 0.0001" and parallelism. Useful for alignment test between centers as well as in morse taper spindles.
TAPER ADAPTERS

TAPER ADAPTERS

In Stock
  • Manufactured to precision from case hardened steel ( 20 Mn Cr5/ SAE 8620 ) to a hardness of 56 +/- 2 HRC . Concentricity within 0.015mm Internal taper as per DIN 228 and external taper R8.
Revolving Center 7 Tips

Revolving Center 7 Tips

In Stock
  • Set Contents – 5 Diff. live centers, 1 Pipe Center, 1 Female Center & 1 Ejecting Key.
  • Assembled with three bearings.
REVOLVING CENTER SLIM BODY / LIVE CENTER SLIM BODY

REVOLVING CENTER SLIM BODY / LIVE CENTER SLIM BODY

In Stock
  • High Precision Bearings.
  • Ultra Slim Design of the body.
  • Slim Nozzle.
Revolving Center / Live Center

Revolving Center / Live Center

In Stock
  • Manufactured from high grade steel hardened point to impart extra strength.
  • Hardened & Ground Steel With 60° Tip Angle.
  • Recommended for use upto 1500 r.p.m.
Mini Live Centers

Mini Live Centers

In Stock
  • Manufactured from Case Hardened Steel.
  • Eccentricity between 5-8 Microns.
  • GRC-7887 is suitable for EMCO Compact & Similar Sized Lathes.
Live Tailstock

Live Tailstock

In Stock
  •  Manufactured from high grade steel hardened point to impart extra strength.
  •  These have single row bearings & Taper rolling to take up radial load and thrust bearings to absorb axial loads.
  •  3 Jaw self centering 50mm Lathe Chuck.
LIVE CENTERS HIGH PRECISION (STANDARD NOZZLE)

LIVE CENTERS HIGH PRECISION (STANDARD NOZZLE)

In Stock
  • Body is Constructed from Hardened and Ground Steel
  • Ecentricity Between .005 – .010 μ
  • Nozzle is Assembled with Double Angular Contact Bearing
Live Centers High Precision (Extended Nozzle)

Live Centers High Precision (Extended Nozzle)

In Stock
  • Solid Construction With No Moving Parts And Fully Hardened.
  • Tip Hardened to 60-63 HRC And Included Angle At Tip is 60°.
Test Bar / Lathe Aligning Mandrels

Test Bar / Lathe Aligning Mandrels

In Stock
  • A test bar, typically made of hardened alloy steel, is inserted between the lathe’s headstock and tailstock centers. 
  • The bar is designed to have a precise straightness and parallel surfaces, often within 0.0001″ or 0.0002″. 
Revolving Tube Centers

Revolving Tube Centers

In Stock
  • Machining Pipes And Similar Hollow Shaft Materials With a High Thrust Capacity.
  • Bevel Section Is Ground After assembly Running In Its Own Bearing.
Turning Tool Holders/Adjustable

Turning Tool Holders/Adjustable

In Stock
  • Supplied with one key & bolt but without tool bit.
  • Properly hardened & grinded & Finely blackodized
Turning Tool Holders – English Pattern

Turning Tool Holders – English Pattern

In Stock
  • Supplied in three shapes; Straight, Left & Right Hand.
  • Manufactured from fine quality special steel & finely blackodized.
Turning Tool Holders – American Pattern

Turning Tool Holders – American Pattern

In Stock
  • Supplied in three shapes; Straight, Left & Right Hand.
  • Manufactured from fine quality special steel & finely blackodized.
Round Tool Holders-Double Ended

Round Tool Holders-Double Ended

In Stock
  • A useful Tool to Hold Round Tool Steel
  • 1 Holder Allows 2 Differebt Sizes of Round Steel to Hold.

Filter Products

Categories

Product Status