Filter

Showing 1–16 of 17 resultsSorted by latest

Sort:
Show:
Turret Head Quick Change Tail Stock-3 Head

Turret Head Quick Change Tail Stock-3 Head

In Stock
  • 1 x Drill Sleeve MT2-3.
  • 1x13mm drill chuck with key.
  • 1xDie holder 13/16″.
  • 1xLive Center
Turret Head Quick Change Tail Stock -4 Head

Turret Head Quick Change Tail Stock -4 Head

In Stock
Vernier Caliper Round Jaws Brass

Vernier Caliper Round Jaws Brass

In Stock
  • For accurately measuring beads, jump rings, and wire diameters without scratching the material.
  • Used by students and researchers for precise dimensional readings of small, delicate components.
Vernier Caliper Brass

Vernier Caliper Brass

In Stock
  • Measures the dimensions of gemstones, beads, and other jewelry components without scratching them.
  • Ideal for hobbyists and craftspeople who need to measure components like small screws, lenses, and tubing.
Tire Tread Feeler Gauge – Single Point Brass

Tire Tread Feeler Gauge – Single Point Brass

In Stock
  • The primary application is to check for uniform or excessive tread wear on passenger cars, motorcycles, and trucks.
  • Comparing the tread depth to legal minimums helps ensure vehicle safety, as worn-out tires lose traction, especially in wet conditions.
Tire Tread Feeler Gauge – Double Point Brass

Tire Tread Feeler Gauge – Double Point Brass

In Stock
  • As a solid piece, a brass tread gauge is highly resistant to breaking or bending, ensuring a long service life. 
  • A double-point brass tire tread feeler gauge is a manual tool used to measure the remaining tread depth on tires.
Profile Depth Gauge Brass

Profile Depth Gauge Brass

In Stock
  • Many brass profile depth gauges are specifically designed for checking tyre tread depth. The gauge measures the distance from the top of the tread to the base of the groove, ensuring tires meet safety standards.
DEAD CENTERS

DEAD CENTERS

In Stock
  • Manufactured from high carbon steel fully hardened and precision ground to DIN standards of 806 having a T.I.R. of + / - 2.5 microns. Available in two types full and half dead centers, with carbide tips and HSS tips . The carbide/ HSS tips are brazed into the socket with a close tolerance for maximum strength
Revolving Center 7 Tips

Revolving Center 7 Tips

In Stock
  • Set Contents – 5 Diff. live centers, 1 Pipe Center, 1 Female Center & 1 Ejecting Key.
  • Assembled with three bearings.
REVOLVING CENTER SLIM BODY / LIVE CENTER SLIM BODY

REVOLVING CENTER SLIM BODY / LIVE CENTER SLIM BODY

In Stock
  • High Precision Bearings.
  • Ultra Slim Design of the body.
  • Slim Nozzle.
Revolving Center / Live Center

Revolving Center / Live Center

In Stock
  • Manufactured from high grade steel hardened point to impart extra strength.
  • Hardened & Ground Steel With 60° Tip Angle.
  • Recommended for use upto 1500 r.p.m.
Mini Live Centers

Mini Live Centers

In Stock
  • Manufactured from Case Hardened Steel.
  • Eccentricity between 5-8 Microns.
  • GRC-7887 is suitable for EMCO Compact & Similar Sized Lathes.
Live Tailstock

Live Tailstock

In Stock
  •  Manufactured from high grade steel hardened point to impart extra strength.
  •  These have single row bearings & Taper rolling to take up radial load and thrust bearings to absorb axial loads.
  •  3 Jaw self centering 50mm Lathe Chuck.
LIVE CENTERS HIGH PRECISION (STANDARD NOZZLE)

LIVE CENTERS HIGH PRECISION (STANDARD NOZZLE)

In Stock
  • Body is Constructed from Hardened and Ground Steel
  • Ecentricity Between .005 – .010 μ
  • Nozzle is Assembled with Double Angular Contact Bearing
Live Centers High Precision (Extended Nozzle)

Live Centers High Precision (Extended Nozzle)

In Stock
  • Solid Construction With No Moving Parts And Fully Hardened.
  • Tip Hardened to 60-63 HRC And Included Angle At Tip is 60°.
Test Bar / Lathe Aligning Mandrels

Test Bar / Lathe Aligning Mandrels

In Stock
  • A test bar, typically made of hardened alloy steel, is inserted between the lathe’s headstock and tailstock centers. 
  • The bar is designed to have a precise straightness and parallel surfaces, often within 0.0001″ or 0.0002″. 

Filter Products

Categories

Product Status