Filter

Showing all 12 resultsSorted by latest

Sort:
Show:
Taper Turning Attachment

Taper Turning Attachment

In Stock
  • Easiest Way to To do Taper Turning , without offsetting the Tailstock.
  • Adjustable Screws on Both Sides for Fine Adjustments.
Taper Turning Attachment With Revolving Center

Taper Turning Attachment With Revolving Center

In Stock
  • Slide Can be Shifted 25mm Left & Right,
  • 1 Handle Rotation will off set the attachment by 1mm.
DEAD CENTERS (PER DIN 806)

DEAD CENTERS (PER DIN 806)

In Stock
  • Manufactured from high carbon steel fully hardened and precision ground to DIN standards of 806 having a T.I.R. of + / - 2.5 microns. Available in two types full and half dead centers, with carbide tips and HSS tips . The carbide/ HSS tips are brazed into the socket with a close tolerance for maximum strength
HIGH PRECISION LIVE CENTERS FOR CNC LATHES HEAD LOW BODY

HIGH PRECISION LIVE CENTERS FOR CNC LATHES HEAD LOW BODY

In Stock
  • This live center is available in two styles , one with a standard body and three interchangeable tips consisting of a tool steel point of 60 degree, a carbide point of 60 degree & a 60 degree extended point. The second type has a low body with same tips as the standard body live center.
HIGH PRECISION LIVE CENTERS FOR CNC LATHES HEAD LIVE CENTER

HIGH PRECISION LIVE CENTERS FOR CNC LATHES HEAD LIVE CENTER

In Stock
  • This live center is available in two styles , one with a standard body and three interchangeable tips consisting of a tool steel point of 60 degree, a carbide point of 60 degree & a 60 degree extended point. The second type has a low body with same tips as the standard body live center.
HIGH PRECISION LIVE CENTERS FOR CNC LATHES LOW BODY EXTENDED POINT

HIGH PRECISION LIVE CENTERS FOR CNC LATHES LOW BODY EXTENDED POINT

In Stock
  • High precision live centers with small bodies having an extended point of 60 degree . These centers have multiple roller bearings and thrust bearings fitted in the body as well as a thrust bearing at the end of the shank ensuring long life as well as smooth operation. Bearings are protected by a neoprene seal for longer life.
HIGH PRECISION LIVE CENTERS FOR CNC LATHES LOW BODY

HIGH PRECISION LIVE CENTERS FOR CNC LATHES LOW BODY

In Stock
  • Precision Live centers having small bodies useful on all CNC lathes, has a point angle of 60 degrees. Fitted with multiple roller bearings and thrust bearing at the end of the points in the shank.
HIGH PRECISION LIVE CENTERS FOR CNC LATHES EXTENDED POINT

HIGH PRECISION LIVE CENTERS FOR CNC LATHES EXTENDED POINT

In Stock
  • High precision live centers with extended point angle of 60 degree with double angular contact bearing, thrust bearing and needle roller bearing at the end of point in shank. Concentricity within 0.005mm.
HIGH PRECISION LIVE CENTERS FOR CNC LATHES

HIGH PRECISION LIVE CENTERS FOR CNC LATHES

In Stock
  • This center can be used on all CNC Lathes, has a point angle of 60 degrees with double angular contact bearing, thrust bearing and needle roller bearing at the end of point in the shank. Available in two types with a carbide point and with a tool steel point. Concentricity within 0.005mm.
STANDARD POINT LIVE CENTER

STANDARD POINT LIVE CENTER

In Stock
  • This center has been made of hardened steel and is precision ground for accuracy. High quality bearings assure smooth movement at high speed. Concentricity of + /- 0.020mm
TAPER & PARALLEL TEST BARS / MANDRELS

TAPER & PARALLEL TEST BARS / MANDRELS

In Stock
  • Manufactured to high precision from alloy steel and heat treated to a hardness of 62HRC +/- 2 HRC . Each piece is inspected for concentricity within 0.0001" and parallelism. Useful for alignment test between centers as well as in morse taper spindles.
TAPER ADAPTERS

TAPER ADAPTERS

In Stock
  • Manufactured to precision from case hardened steel ( 20 Mn Cr5/ SAE 8620 ) to a hardness of 56 +/- 2 HRC . Concentricity within 0.015mm Internal taper as per DIN 228 and external taper R8.

Filter Products

Categories

Product Status