Filter
Sort:
Show:
VICE MOUNTED BENDER

VICE MOUNTED BENDER

In Stock
  • The primary purpose of a vice-mounted wire bender is to bend wires accurately and consistently. It is often used in metalworking, jewelry making, and other crafts where precise wire shapes are required.
  • Design: These benders are designed to be mounted on a vice, providing stability and control during the bending process. The vice holds the wire securely in place while the bending mechanism shapes the wire   according to the desired pattern or angle.
  • Users typically insert the wire into the bender and secure it in the vice. The user then adjusts the position of the wire and applies pressure to create the desired bend.
BORING BAR WITH HOLDER

BORING BAR WITH HOLDER

In Stock
  • Manufactured from good quality tool steel
  • Supplied with 1 Allen key
  • Tool bit not included
DRILL CHUCK ARBOR

DRILL CHUCK ARBOR

In Stock
  • Drill chuck arbors are double ended steel shafts.
  • One end is machined to fit a machine spindle and the other fits into the back of a drill chuck.
OPEN END SLEEVE WITH EXTRACTOR – AS PER DIN 228

OPEN END SLEEVE WITH EXTRACTOR – AS PER DIN 228

In Stock
  • Hardened & ground both internal & external
EXTENSION SLEEVES-AS PER DIN 2187

EXTENSION SLEEVES-AS PER DIN 2187

In Stock
  • Manufactured From Case Hardened Steel.
  • Used For Extending The Taper Shank Tools.
  • Precision Ground From Both Inside & Outside In "A" Grade.
 
VALVE SEAT & FACE CUTTER SETS – PROFESSIONAL- 45°

VALVE SEAT & FACE CUTTER SETS – PROFESSIONAL- 45°

In Stock
  • Manufactured from high grade carbon steel, properly hardened & tempered.
  • The cutting edge of all the cutters are accurately ground for best results.
REVOLVING TAILSTOCK ARBOR

REVOLVING TAILSTOCK ARBOR

In Stock
  • It is used assist small diameter of work at the tailstock where revolving  center is not practical.
COLLET SPANNER

COLLET SPANNER

In Stock
  • Color: Black, Material: Steel, Size: 20.5x0.5cm/ 8.07x0.20 inch
  • Made Of Stainless Steel With Soft Brass Finish, Durable In Use
  • Made Of Best Quality Material.
COLLET HOLDERS

COLLET HOLDERS

In Stock
  • Shank Diameter: 32mm
  • Shank Length: 100mm
  • straight shank C25-100mm ER32 collet milling chuck holder
FLOATING ROUND DIE HOLDER

FLOATING ROUND DIE HOLDER

In Stock
  • Countersunk on center hole for smoother chip flow
  • 2 set screws 90° apart
  • Black oxide finish
  • Dies not included
DRILL CHUCK ARBOR-TAPER SHANK ACC DIN – 238

DRILL CHUCK ARBOR-TAPER SHANK ACC DIN – 238

In Stock
  • Drill chuck arbors are double ended steel shafts.
  • One end is machined to fit a machine spindle and the other fits into the back of a drill chuck.
TEST MANDRELS / TEST BARS

TEST MANDRELS / TEST BARS

In Stock
  • Manufactured From Hardened Alloy Steel.
  • A Must To Have Tool In Workshop for testing lathe machines.
5C COLLET SET OF 11 PCS

5C COLLET SET OF 11 PCS

In Stock
  • Clamping Size Range : 3, 4, 5, 6, 8, 10, 11, 12, 14, 15 & 16mm
ER SPRING COLLET SETS

ER SPRING COLLET SETS

In Stock
  • The use of ER COLLET SYSTEM provides an advantage of holding any type of round shank tool.
  • An ER COLLET can be used in tapping, reaming , drilling etc.
  • Provides high accuracy.
ARBORS NT SHANK

ARBORS NT SHANK

In Stock
  • Manufactured From Hardened Steel.
  • Arbors Are Hardened & Precision Ground.
  • Supplied In ISO Shanks.
MT COLLET SET OF 6 PC

MT COLLET SET OF 6 PC

In Stock
  • These can be used to hold the tools with better accuracy.
  • Provides lesser run-out.

Filter Products

Categories

Product Status