Filter
Sort:
Show:
VICE MOUNTED BENDER

VICE MOUNTED BENDER

In Stock
  • The primary purpose of a vice-mounted wire bender is to bend wires accurately and consistently. It is often used in metalworking, jewelry making, and other crafts where precise wire shapes are required.
  • Design: These benders are designed to be mounted on a vice, providing stability and control during the bending process. The vice holds the wire securely in place while the bending mechanism shapes the wire   according to the desired pattern or angle.
  • Users typically insert the wire into the bender and secure it in the vice. The user then adjusts the position of the wire and applies pressure to create the desired bend.
Solid Angle Plates

Solid Angle Plates

In Stock
  • Manufactured from good quality seasoned casting.
  • Properly hardened & ground from all the sides.
  • Properly Machined 900Square.
  • Precision groundsides & end.
 
Iron Casted Slotted Angle Plates

Iron Casted Slotted Angle Plates

In Stock
  • Manufactured from good quality seasoned casting.
  • Properly hardened & ground from all the sides.
  • Properly Machined 900Square.
V- Angle Plates

V- Angle Plates

In Stock
  • Manufactured from good quality seasoned casting.
  • Combined Vee Block & Angle Plate.
Stepped Angle Plates

Stepped Angle Plates

In Stock
  • Hardened and Precision ground.
  • Tapped holes for clamping jobs in any position
Universal sheet metal machine – Rolling, Bending & Cutting 3 in 1

Universal sheet metal machine – Rolling, Bending & Cutting 3 in 1

In Stock
  • 3 x  Rollers including rear pinch roll and top slip out roll.
  • 4 x holes for locking the equipment.
  • Segmented press brake tooling for box and pan folding up to 90°.
Metal Brake Bender Vise Mount

Metal Brake Bender Vise Mount

In Stock
  • The bending jaw is equipped with magnets that ensure a secure hold in the vice. This keeps the jaw stable during the bending process and ensures a controlled and safe working environment
  • Bending jaw offers the possibility to perform precise bends on materials such as mild steel.
  • With a maximum bending capacity of 3 mm, you can achieve accurate and professional results
Mini rolling & bending machine

Mini rolling & bending machine

In Stock
  • An easier-to-use tool for making perfect bends in ship model planking.
  • Works on wood strips up to 2-1/4 inches wide and 1/8 inch thick
  • It will also make smooth, no kink curves in plastic and metal strip stock and in 1/16 inch, 3/32 inch and 1/8 inch tubing and soft wire.
Plate Bench Shear – Spring Type

Plate Bench Shear – Spring Type

In Stock
  • Light weight powerful shears for cutting sheets, metal rods & bars
  • Blade are manufactured from hardened tool steel and are held in a open position by a strong spring to help prevent accidents
Plate Bench Shear

Plate Bench Shear

In Stock
  • Ideally Used For Shearing Plates Or Round Blocks.
  • Long Handle To Increase Torque Force.
  • Blades Are Hardened & Tempered.
Portable Hand Shear

Portable Hand Shear

In Stock
  • If you mount this onto a bench or into a vice, the long  handle enables controlled movement of the wheel to cut straight,curved and internal corners.
  • Ideal for forming car body parts.
Mini Bending Brake

Mini Bending Brake

In Stock
  • Mini Sheet metal bender & Press bending brake for brass or other light sheet metals.
  • Makes bends up to 90 degrees (depending on how far you tighten the press screws).
  • Can also be used on plastic.
Mini Universal Bender

Mini Universal Bender

In Stock
  • Forms wire, flat metal and tubing into clamps, handle brackets, hooks, coils and more
  • Make sharp angle bends in wire and rod
  • Includes circle pins for 3/16", 1/4", 1/2" dia, circle, 1" diacircle die, form pin follower, sharp angle die, gauge and handle

Filter Products

Categories

Product Status