Filter
Sort:
Show:
VICE MOUNTED BENDER

VICE MOUNTED BENDER

In Stock
  • The primary purpose of a vice-mounted wire bender is to bend wires accurately and consistently. It is often used in metalworking, jewelry making, and other crafts where precise wire shapes are required.
  • Design: These benders are designed to be mounted on a vice, providing stability and control during the bending process. The vice holds the wire securely in place while the bending mechanism shapes the wire   according to the desired pattern or angle.
  • Users typically insert the wire into the bender and secure it in the vice. The user then adjusts the position of the wire and applies pressure to create the desired bend.
PRECISION BORING HEAD KIT – 62MM R8 SHANK

PRECISION BORING HEAD KIT – 62MM R8 SHANK

In Stock
  •  1 x Boring Head
  •  1 x Brazed Boring Bars (12mm dia)
  •  1 x  Shank
  •  2 x Fly Cutter 45 Degree for 6mm Round Tools
 
MINI VERTICAL SLIDE

MINI VERTICAL SLIDE

In Stock
  • Suitable for Bench Lathes upto 150mm Swing
  • Vertical Travel 70mm
  • Base Dimension: 50x55mm
  • Sliding Table: 90x50mm
  • Dial Graduated to 0-50
  • High Grade casting and Smooth Finish.
LIVE TAILSTOCK

LIVE TAILSTOCK

In Stock
  • Manufactured from high grade steel hardened point hardened point to impart extra strength.
  • These have single row bearings & Taper Rolling to take up radial load and thrust bearings to absorb axial loads.
  • 3 jaws self centering 50mm lathe chuck.
LIVE CENTERS HIGH PRECISION (EXTENDED NOZZLE)

LIVE CENTERS HIGH PRECISION (EXTENDED NOZZLE)

In Stock
  • Body is constructed from hardened and ground steel.
  • eccentricity between .005 - .010
  • Nozzle is assembled with double angular contact bearing.
  • Needle roller bearing at the end of the points in the shank.
BEVEL REVOLVING TUBE PIPE CENTERS

BEVEL REVOLVING TUBE PIPE CENTERS

In Stock
  • Machining Pipes And Similar Hollow Shaft Materials With a High Thrust Capacity.
  • Bevel Section Is Ground After assembly Running In Its Own Bearing.
  • Designed to hold hollow & pipe Works.
  • Manufactured from heat treated high carbon Alloy steel.
LATHE CENTER / DEAD CENTER – FULL

LATHE CENTER / DEAD CENTER – FULL

In Stock
  • Solid Construction WIth No Moving Parts And Fully Hardened.
  • Tip Hardened to 60-63 HRC And Included Angle At Tip is 60°.
  • Hardened High Speed Centers Ensure Long Life.
  • Carbide Tipped Centers Give Longer Tool Life & Require Less Grinding.
  • Covers Widest Range Of Center Hole Sizes.
  • Eliminates Special Centers.
LATHE CENTER / DEAD CENTER – HALF

LATHE CENTER / DEAD CENTER – HALF

In Stock
  • Solid Construction With No Moving Parts And Fully Hardened.
  • Tip Hardened to 60-63 HRC And Included Angle At Tip is 60°.
  • Hardened High Speed Centers Ensure Long Life.
REVOLVING CENTER 7 TIPS

REVOLVING CENTER 7 TIPS

In Stock
  • Set Contents - 5 Diff. live centers, 1 Pipe Center, 1 Female Center & 1 Ejecting Key.
  • Assembled with three bearings.
  • Ecentricity between .005 - .010 μ
  • Body is constructed from hardened and ground steel.
  • Widely used by Modelmakers & Woodworkers on mini lathes.
MINI LIVE CENTERS

MINI LIVE CENTERS

In Stock
  • Manufactured from Case Hardened Steel.
  • GRC-7887 is suitable for EMCO Compact & Similar Sized Lathes
REVOLVING CENTER SLIM BODY / LIVE CENTER SLIM BODY

REVOLVING CENTER SLIM BODY / LIVE CENTER SLIM BODY

In Stock
  • High Precision Bearings.
  • Ultra Slim Design of the body.
  • Slim Nozzle.
  • Three-way running in ball bearings for highest precision.
  • Manufactured from hardened steel.
REVOLVING CENTER / LIVE CENTER

REVOLVING CENTER / LIVE CENTER

In Stock
  • Manufactured from high grade steel hardened point to impart extra strength.
  • Hardened & Ground Steel With 60° Tip Angle.
  • Recommended for use upto 1500 r.p.m
Universal sheet metal machine – Rolling, Bending & Cutting 3 in 1

Universal sheet metal machine – Rolling, Bending & Cutting 3 in 1

In Stock
  • 3 x  Rollers including rear pinch roll and top slip out roll.
  • 4 x holes for locking the equipment.
  • Segmented press brake tooling for box and pan folding up to 90°.
Metal Brake Bender Vise Mount

Metal Brake Bender Vise Mount

In Stock
  • The bending jaw is equipped with magnets that ensure a secure hold in the vice. This keeps the jaw stable during the bending process and ensures a controlled and safe working environment
  • Bending jaw offers the possibility to perform precise bends on materials such as mild steel.
  • With a maximum bending capacity of 3 mm, you can achieve accurate and professional results
Mini rolling & bending machine

Mini rolling & bending machine

In Stock
  • An easier-to-use tool for making perfect bends in ship model planking.
  • Works on wood strips up to 2-1/4 inches wide and 1/8 inch thick
  • It will also make smooth, no kink curves in plastic and metal strip stock and in 1/16 inch, 3/32 inch and 1/8 inch tubing and soft wire.
Plate Bench Shear – Spring Type

Plate Bench Shear – Spring Type

In Stock
  • Light weight powerful shears for cutting sheets, metal rods & bars
  • Blade are manufactured from hardened tool steel and are held in a open position by a strong spring to help prevent accidents

Filter Products

Categories

Product Status