Filter
Sort:
Show:
VICE MOUNTED BENDER

VICE MOUNTED BENDER

In Stock
  • The primary purpose of a vice-mounted wire bender is to bend wires accurately and consistently. It is often used in metalworking, jewelry making, and other crafts where precise wire shapes are required.
  • Design: These benders are designed to be mounted on a vice, providing stability and control during the bending process. The vice holds the wire securely in place while the bending mechanism shapes the wire   according to the desired pattern or angle.
  • Users typically insert the wire into the bender and secure it in the vice. The user then adjusts the position of the wire and applies pressure to create the desired bend.
PRECISION SELF CENTERING 5 AXIS VISE

PRECISION SELF CENTERING 5 AXIS VISE

In Stock
  • Self centering Machine Vise Compatible for 4th & 5th Axis CNC Machining Centers both in Horizontal & Vertical Machining
  • Centre Repetition  Position with accuracy of  + - 0.02 MM
  • High Quality Alloy Steel. Case Hardening upto HRC 60
PRECISION MODULAR STEEL VISE

PRECISION MODULAR STEEL VISE

In Stock
  • High Precision High Alloy Steel Vise with Maximum Rigidity with Case Hardening upto 60 ±2 HRC.
  • The space saving design and solid construction allow a maximum blocking ratio to total overall dimension of the vise.
  • It Features quick Clamping Sliding in the Vise of Base Slide. The Clamping is secured with the Main Screw and allows 4 further Interchangeable clamping system like Hydraulic, pneumatic, Manual Hydraulic.
SLIDING T-BEVEL WOODEN

SLIDING T-BEVEL WOODEN

In Stock
    • An Adjustable Gauge for setting & transferring angels.
    • Stainless Steel Blade & Heavy Duty Aluminum Handle.
SLIDING T-BEVEL ALUMINIUM

SLIDING T-BEVEL ALUMINIUM

In Stock
    • An Adjustable Gauge for setting & transferring angels.
    • Stainless Steel Blade & Heavy Duty Aluminum Handle.
TRY SQUARE ALUMINIUM

TRY SQUARE ALUMINIUM

In Stock
  • Stainless Steel  Blade & Heavy Duty  Aluminum Handel.
  • High Visibility makings
CONTROL STEEL SQUARES

CONTROL STEEL SQUARES

In Stock
  •  Manufactured from fine quality carbon steel.
  •  Zinc Plated for Rust Prevention.
PLATED STEEL SQUARES

PLATED STEEL SQUARES

In Stock
  •  Manufactured from fine quality carbon steel.
  •  Zinc Plated for Rust Prevention.
BEVELLED EDGE STEEL SQUARES

BEVELLED EDGE STEEL SQUARES

In Stock
  • Blades bevelled on both sides to make line contact with job.
  • Both Blade & Stock is Hardened & ground for straightness & parallelism.
  • Single piece construction from fine quality tool steel.
ADJUSTABLE STEEL SQUARES

ADJUSTABLE STEEL SQUARES

In Stock
  • Blade is Hardened & ground for straightness & parallelism.
  • Stock is Precision Ground.
CARPENTERS STEEL SQUARES

CARPENTERS STEEL SQUARES

In Stock
  • Stock is made of quality casted steel.
  • Blades are made of stainless steel.
  • Both sides of blades are fine etched with one side Imperial & one side metric graduations. Very useful tool for carpenters.
MINI VERTICAL SLIDE

MINI VERTICAL SLIDE

In Stock
  • Suitable for Bench Lathes upto 150mm Swing
  • Vertical Travel 70mm
  • Base Dimension: 50x55mm
  • Sliding Table: 90x50mm
  • Dial Graduated to 0-50
  • High Grade casting and Smooth Finish.
LIVE TAILSTOCK

LIVE TAILSTOCK

In Stock
  • Manufactured from high grade steel hardened point hardened point to impart extra strength.
  • These have single row bearings & Taper Rolling to take up radial load and thrust bearings to absorb axial loads.
  • 3 jaws self centering 50mm lathe chuck.
LIVE CENTERS HIGH PRECISION (EXTENDED NOZZLE)

LIVE CENTERS HIGH PRECISION (EXTENDED NOZZLE)

In Stock
  • Body is constructed from hardened and ground steel.
  • eccentricity between .005 - .010
  • Nozzle is assembled with double angular contact bearing.
  • Needle roller bearing at the end of the points in the shank.
BEVEL REVOLVING TUBE PIPE CENTERS

BEVEL REVOLVING TUBE PIPE CENTERS

In Stock
  • Machining Pipes And Similar Hollow Shaft Materials With a High Thrust Capacity.
  • Bevel Section Is Ground After assembly Running In Its Own Bearing.
  • Designed to hold hollow & pipe Works.
  • Manufactured from heat treated high carbon Alloy steel.
LATHE CENTER / DEAD CENTER – FULL

LATHE CENTER / DEAD CENTER – FULL

In Stock
  • Solid Construction WIth No Moving Parts And Fully Hardened.
  • Tip Hardened to 60-63 HRC And Included Angle At Tip is 60°.
  • Hardened High Speed Centers Ensure Long Life.
  • Carbide Tipped Centers Give Longer Tool Life & Require Less Grinding.
  • Covers Widest Range Of Center Hole Sizes.
  • Eliminates Special Centers.

Filter Products

Categories

Product Status