Filter
Sort:
Show:
VICE MOUNTED BENDER

VICE MOUNTED BENDER

In Stock
  • The primary purpose of a vice-mounted wire bender is to bend wires accurately and consistently. It is often used in metalworking, jewelry making, and other crafts where precise wire shapes are required.
  • Design: These benders are designed to be mounted on a vice, providing stability and control during the bending process. The vice holds the wire securely in place while the bending mechanism shapes the wire   according to the desired pattern or angle.
  • Users typically insert the wire into the bender and secure it in the vice. The user then adjusts the position of the wire and applies pressure to create the desired bend.
INDEXABLE TURNING TOOL SET OF 7PC WITH INSERTS

INDEXABLE TURNING TOOL SET OF 7PC WITH INSERTS

In Stock
  • Turning tool set for indexable inserts
  • 7 pieces with key
  • Each turning tool with indexable insert of carbide metal quality the indexable inserts have 4 cutting edges Insert shape CCMT
Vee Block stepped groove

Vee Block stepped groove

In Stock
  • Supplied in matched pairs.
  • Holds both square and round job.
  • clamps Included.
  • Side hole provided in each clamp to provide clamping from side.
Steel Vee Blocks

Steel Vee Blocks

In Stock
  • Supplied in matched pairs.
  • Made of best quality steel, hardened throughout.
  • Accurately machined & precision ground to extreme accuracy.
Elongated V Blocks

Elongated V Blocks

In Stock
  • All Side precision ground parallel and square.
  • "V" Grooves ground central & Parallel and square.
  • Perfect alignment in matched pair..
  • Holds the square and round work.
Vee Blocks – Non Protruding

Vee Blocks – Non Protruding

In Stock
  • Supplied in matched pairs.
  • Made of best quality steel, hardened throughout up to 55 - 60 HRC
  • Accurately machined & precision ground to extreme accuracy.
Cast Iron Vee Block

Cast Iron Vee Block

In Stock
  • Made from quality casted seasoned steel.
  • Supplied in matched pairs.
  • The "V" is accurate to 900.
  • Very useful tool for laying out round work & holding it for machining
Toolmaker’s Ultimate Vee Blocks

Toolmaker’s Ultimate Vee Blocks

In Stock
  • Block is hardened & ground.
  • Made of Alloy Steel.
  • Provided with one blacodized clamp.
  • The design offers greater versatility to this vee block : capable of being used on base, on end flat in either side as the clamp is within the outside width of the block.
 
Four Way Vee Blocks

Four Way Vee Blocks

In Stock
  • Made from quality casted seasoned steel.
  • Supplied in matched pairs.
  • Very useful tool for laying out round work & holding it for machining
  • Each block incorporates 4 different sized V's, therefore support wide range of jobs.
Triple Vee Blocks

Triple Vee Blocks

In Stock
  • Manufactured from steel.
  •  Every angle 90*
  •  Matched Pairs
Versatile V-Block with Clamp

Versatile V-Block with Clamp

In Stock
  • Manufactured from finely selected tool steel fully hardened to 55 - 60 HRC.
  • Supplied complete with 1 top mounting clamp & 2 screws in single piece
  • Supplied complete with 2 blocks, 2 top mounting clamp & 4 screws in pair.
  • can be used either from side, center or the end.
Universal sheet metal machine – Rolling, Bending & Cutting 3 in 1

Universal sheet metal machine – Rolling, Bending & Cutting 3 in 1

In Stock
  • 3 x  Rollers including rear pinch roll and top slip out roll.
  • 4 x holes for locking the equipment.
  • Segmented press brake tooling for box and pan folding up to 90°.
Metal Brake Bender Vise Mount

Metal Brake Bender Vise Mount

In Stock
  • The bending jaw is equipped with magnets that ensure a secure hold in the vice. This keeps the jaw stable during the bending process and ensures a controlled and safe working environment
  • Bending jaw offers the possibility to perform precise bends on materials such as mild steel.
  • With a maximum bending capacity of 3 mm, you can achieve accurate and professional results
Mini rolling & bending machine

Mini rolling & bending machine

In Stock
  • An easier-to-use tool for making perfect bends in ship model planking.
  • Works on wood strips up to 2-1/4 inches wide and 1/8 inch thick
  • It will also make smooth, no kink curves in plastic and metal strip stock and in 1/16 inch, 3/32 inch and 1/8 inch tubing and soft wire.
Plate Bench Shear – Spring Type

Plate Bench Shear – Spring Type

In Stock
  • Light weight powerful shears for cutting sheets, metal rods & bars
  • Blade are manufactured from hardened tool steel and are held in a open position by a strong spring to help prevent accidents
Plate Bench Shear

Plate Bench Shear

In Stock
  • Ideally Used For Shearing Plates Or Round Blocks.
  • Long Handle To Increase Torque Force.
  • Blades Are Hardened & Tempered.

Filter Products

Categories

Product Status