Filter
Sort:
Show:
VICE MOUNTED BENDER

VICE MOUNTED BENDER

In Stock
  • The primary purpose of a vice-mounted wire bender is to bend wires accurately and consistently. It is often used in metalworking, jewelry making, and other crafts where precise wire shapes are required.
  • Design: These benders are designed to be mounted on a vice, providing stability and control during the bending process. The vice holds the wire securely in place while the bending mechanism shapes the wire   according to the desired pattern or angle.
  • Users typically insert the wire into the bender and secure it in the vice. The user then adjusts the position of the wire and applies pressure to create the desired bend.
ENGINEER’S BENCH VICE

ENGINEER’S BENCH VICE

In Stock
  • Manufactured from shock resisting cast iron, free from sand holes, pits, blow holes, scrabs and other imperfection.
  • Unbreakable malleable steel nut for extra tuff grip.
BENCH & DRILL PRESS VICE -MULTI FUNCTION

BENCH & DRILL PRESS VICE -MULTI FUNCTION

In Stock
  • Manufactured from steel grade cast iron.
  • 1/4''-3'' pipe Jaw Capacity .
  • 6'' Pipe capacity using 4 Pins.
BENCH VICE -MULTIPURPOSE ROTATING

BENCH VICE -MULTIPURPOSE ROTATING

In Stock
  • Rotating Head .
  • Hardened Steel jaws-Replaceable.
  • Integrated Pipe Jas.
WORKSHOP BENCH VICE – 240° SWIVEL BASE

WORKSHOP BENCH VICE – 240° SWIVEL BASE

In Stock
  • Manufactured from steel grade cast iron.
  • Can also hold round pipes from 1/2'' to 1-3/4''.
  • A choice of every workshop / Garage / D.I.Y.
  • Weight 4.5 kg /9 lbs
STEEL BENCH VICE

STEEL BENCH VICE

In Stock
  • Manufactured from High Tensile Steel Plate
  • Swivel Base provides flexibility for locking at any desired angle by its low profile 360°.
  • Ideal for Machinist or Craftsmen.
OFFSET JAW VICE

OFFSET JAW VICE

In Stock
  • Robust Construction. Manufactured from Fabricated Steel
  • Offset feature provides the facility for holding long vertical work with the full width of the jaws without obstruction from the main body of the vice.
ENGINEER’S STEEL PARALLELS & SETS

ENGINEER’S STEEL PARALLELS & SETS

In Stock
  • Very useful milling & drilling .
  • Made from alloy steel.
  • Properly hardened & ground.
ADJUSTABLE TAILSTOCK

ADJUSTABLE TAILSTOCK

In Stock
  • Mini tailstock are relatively inexpensive than any other tailstock.
  • Relatively small & light so they fit into the budgets.
 
ADJUSTABLE TAILSTOCK

ADJUSTABLE TAILSTOCK

In Stock
  • Mini tailstock are relatively inexpensive than any other tailstock.
  • Relatively small & light so they fit into the budgets.
MINI TAILSTOCK TILTING

MINI TAILSTOCK TILTING

In Stock
  • Manufactured from Seasoned Cast Iron
  • Adjustable to Height 38-63mm
Engineer’s Steel Parallels & Sets

Engineer’s Steel Parallels & Sets

In Stock
This set features a variety of sizes, including 1/2 in., 5/8 in., 3/4 in., 7/8 in., 1 in., 1-1/8 in., 1-1/4 in., 1-3/8 in., 1-1/2 in. and 1-5/8 in. W. Each parallel measures in at 6 in. L and 1/8 in. thick.
Wavy Parallel Set of 8 Pairs

Wavy Parallel Set of 8 Pairs

In Stock
For supporting a work piece in a machine vice, to elevate the workpiece above the vice jaws.
V Sine Bars

V Sine Bars

In Stock
  • Hardened & ground.
  • Clamp included.
  • Accurate to .0005"
  • 1" round capacity
Sine Bars

Sine Bars

In Stock
Use of product - Combo Edge Finder installs in Collet or chuck of milling machine. Precisely locates edge of workpiece relative to center of spindle. Works in both feed directions for quick and easy use.  
Universal sheet metal machine – Rolling, Bending & Cutting 3 in 1

Universal sheet metal machine – Rolling, Bending & Cutting 3 in 1

In Stock
  • 3 x  Rollers including rear pinch roll and top slip out roll.
  • 4 x holes for locking the equipment.
  • Segmented press brake tooling for box and pan folding up to 90°.

Filter Products

Categories

Product Status