Filter
Sort:
Show:
VICE MOUNTED BENDER

VICE MOUNTED BENDER

In Stock
  • The primary purpose of a vice-mounted wire bender is to bend wires accurately and consistently. It is often used in metalworking, jewelry making, and other crafts where precise wire shapes are required.
  • Design: These benders are designed to be mounted on a vice, providing stability and control during the bending process. The vice holds the wire securely in place while the bending mechanism shapes the wire   according to the desired pattern or angle.
  • Users typically insert the wire into the bender and secure it in the vice. The user then adjusts the position of the wire and applies pressure to create the desired bend.
ENGINEER’S BENCH VICE

ENGINEER’S BENCH VICE

In Stock
  • Manufactured from shock resisting cast iron, free from sand holes, pits, blow holes, scrabs and other imperfection.
  • Unbreakable malleable steel nut for extra tuff grip.
BENCH & DRILL PRESS VICE -MULTI FUNCTION

BENCH & DRILL PRESS VICE -MULTI FUNCTION

In Stock
  • Manufactured from steel grade cast iron.
  • 1/4''-3'' pipe Jaw Capacity .
  • 6'' Pipe capacity using 4 Pins.
BENCH VICE -MULTIPURPOSE ROTATING

BENCH VICE -MULTIPURPOSE ROTATING

In Stock
  • Rotating Head .
  • Hardened Steel jaws-Replaceable.
  • Integrated Pipe Jas.
WORKSHOP BENCH VICE – 240° SWIVEL BASE

WORKSHOP BENCH VICE – 240° SWIVEL BASE

In Stock
  • Manufactured from steel grade cast iron.
  • Can also hold round pipes from 1/2'' to 1-3/4''.
  • A choice of every workshop / Garage / D.I.Y.
  • Weight 4.5 kg /9 lbs
STEEL BENCH VICE

STEEL BENCH VICE

In Stock
  • Manufactured from High Tensile Steel Plate
  • Swivel Base provides flexibility for locking at any desired angle by its low profile 360°.
  • Ideal for Machinist or Craftsmen.
OFFSET JAW VICE

OFFSET JAW VICE

In Stock
  • Robust Construction. Manufactured from Fabricated Steel
  • Offset feature provides the facility for holding long vertical work with the full width of the jaws without obstruction from the main body of the vice.
ADJUSTABLE TAILSTOCK

ADJUSTABLE TAILSTOCK

In Stock
  • Mini tailstock are relatively inexpensive than any other tailstock.
  • Relatively small & light so they fit into the budgets.
 
ADJUSTABLE TAILSTOCK

ADJUSTABLE TAILSTOCK

In Stock
  • Mini tailstock are relatively inexpensive than any other tailstock.
  • Relatively small & light so they fit into the budgets.
MINI TAILSTOCK TILTING

MINI TAILSTOCK TILTING

In Stock
  • Manufactured from Seasoned Cast Iron
  • Adjustable to Height 38-63mm
BORING BAR WITH HOLDER

BORING BAR WITH HOLDER

In Stock
  • Manufactured from good quality tool steel
  • Supplied with 1 Allen key
  • Tool bit not included
DRILL CHUCK ARBOR

DRILL CHUCK ARBOR

In Stock
  • Drill chuck arbors are double ended steel shafts.
  • One end is machined to fit a machine spindle and the other fits into the back of a drill chuck.
OPEN END SLEEVE WITH EXTRACTOR – AS PER DIN 228

OPEN END SLEEVE WITH EXTRACTOR – AS PER DIN 228

In Stock
  • Hardened & ground both internal & external
EXTENSION SLEEVES-AS PER DIN 2187

EXTENSION SLEEVES-AS PER DIN 2187

In Stock
  • Manufactured From Case Hardened Steel.
  • Used For Extending The Taper Shank Tools.
  • Precision Ground From Both Inside & Outside In "A" Grade.
 
VALVE SEAT & FACE CUTTER SETS – PROFESSIONAL- 45°

VALVE SEAT & FACE CUTTER SETS – PROFESSIONAL- 45°

In Stock
  • Manufactured from high grade carbon steel, properly hardened & tempered.
  • The cutting edge of all the cutters are accurately ground for best results.
REVOLVING TAILSTOCK ARBOR

REVOLVING TAILSTOCK ARBOR

In Stock
  • It is used assist small diameter of work at the tailstock where revolving  center is not practical.

Filter Products

Categories

Product Status