Filter
Sort:
Show:
VICE MOUNTED BENDER

VICE MOUNTED BENDER

In Stock
  • The primary purpose of a vice-mounted wire bender is to bend wires accurately and consistently. It is often used in metalworking, jewelry making, and other crafts where precise wire shapes are required.
  • Design: These benders are designed to be mounted on a vice, providing stability and control during the bending process. The vice holds the wire securely in place while the bending mechanism shapes the wire   according to the desired pattern or angle.
  • Users typically insert the wire into the bender and secure it in the vice. The user then adjusts the position of the wire and applies pressure to create the desired bend.
ENGINEER’S STEEL PARALLELS & SETS

ENGINEER’S STEEL PARALLELS & SETS

In Stock
  • Very useful milling & drilling .
  • Made from alloy steel.
  • Properly hardened & ground.
Z TYPE EDGE FINDER

Z TYPE EDGE FINDER

In Stock
  • Useful inspection tool for fast & efficient dimensional inspection on production parts.
EDGE & CENTER FINDER SET

EDGE & CENTER FINDER SET

In Stock
  • Useful inspection tool for fast & efficient dimensional inspection on production parts.
O RING HOOK & SCRIBE

O RING HOOK & SCRIBE

In Stock
  •  Knurled Center Tips.
  •  Hardened tips.
  •  Used for retrieving small parts, nuts & washers etc.
  •  O Ring & Steel pick For Easy removing & installing.
BELL PUNCH CENTER FINDER

BELL PUNCH CENTER FINDER

In Stock
  • Bell Punch Easily locates and allows center punching of ends on round stock of upto 35mm
  • Hardened to 48-52 HRC
  • A Very Handy Tool if required precede Drilling on Round Bar
EDGE & CENTER FINDER

EDGE & CENTER FINDER

In Stock
  • Useful inspection tool for fast & efficient dimensional inspection on production parts.
WIGGLER & CENTER FINDER SET

WIGGLER & CENTER FINDER SET

In Stock
  • Very Useful tool for locating applications points on Milling & Other machines
  • Set consist of wiggler chuck, Ball contact, Disc Contact, Needle Point & offset Indicator Holder attachment
CENTER FINDER FOR ROUND BARS

CENTER FINDER FOR ROUND BARS

In Stock
  • Very useful instrument to find the centers on any round object.
  • Can be fixed in collet or the drill chuck.
MINI VERTICAL SLIDE

MINI VERTICAL SLIDE

In Stock
  • Suitable for Bench Lathes upto 150mm Swing
  • Vertical Travel 70mm
  • Base Dimension: 50x55mm
  • Sliding Table: 90x50mm
  • Dial Graduated to 0-50
  • High Grade casting and Smooth Finish.
LIVE TAILSTOCK

LIVE TAILSTOCK

In Stock
  • Manufactured from high grade steel hardened point hardened point to impart extra strength.
  • These have single row bearings & Taper Rolling to take up radial load and thrust bearings to absorb axial loads.
  • 3 jaws self centering 50mm lathe chuck.
LIVE CENTERS HIGH PRECISION (EXTENDED NOZZLE)

LIVE CENTERS HIGH PRECISION (EXTENDED NOZZLE)

In Stock
  • Body is constructed from hardened and ground steel.
  • eccentricity between .005 - .010
  • Nozzle is assembled with double angular contact bearing.
  • Needle roller bearing at the end of the points in the shank.
BEVEL REVOLVING TUBE PIPE CENTERS

BEVEL REVOLVING TUBE PIPE CENTERS

In Stock
  • Machining Pipes And Similar Hollow Shaft Materials With a High Thrust Capacity.
  • Bevel Section Is Ground After assembly Running In Its Own Bearing.
  • Designed to hold hollow & pipe Works.
  • Manufactured from heat treated high carbon Alloy steel.
LATHE CENTER / DEAD CENTER – FULL

LATHE CENTER / DEAD CENTER – FULL

In Stock
  • Solid Construction WIth No Moving Parts And Fully Hardened.
  • Tip Hardened to 60-63 HRC And Included Angle At Tip is 60°.
  • Hardened High Speed Centers Ensure Long Life.
  • Carbide Tipped Centers Give Longer Tool Life & Require Less Grinding.
  • Covers Widest Range Of Center Hole Sizes.
  • Eliminates Special Centers.
LATHE CENTER / DEAD CENTER – HALF

LATHE CENTER / DEAD CENTER – HALF

In Stock
  • Solid Construction With No Moving Parts And Fully Hardened.
  • Tip Hardened to 60-63 HRC And Included Angle At Tip is 60°.
  • Hardened High Speed Centers Ensure Long Life.
REVOLVING CENTER 7 TIPS

REVOLVING CENTER 7 TIPS

In Stock
  • Set Contents - 5 Diff. live centers, 1 Pipe Center, 1 Female Center & 1 Ejecting Key.
  • Assembled with three bearings.
  • Ecentricity between .005 - .010 μ
  • Body is constructed from hardened and ground steel.
  • Widely used by Modelmakers & Woodworkers on mini lathes.

Filter Products

Categories

Product Status