Filter
Sort:
Show:
ENGINEER’S BENCH VICE

ENGINEER’S BENCH VICE

In Stock
  • Manufactured from shock resisting cast iron, free from sand holes, pits, blow holes, scrabs and other imperfection.
  • Unbreakable malleable steel nut for extra tuff grip.
BENCH & DRILL PRESS VICE -MULTI FUNCTION

BENCH & DRILL PRESS VICE -MULTI FUNCTION

In Stock
  • Manufactured from steel grade cast iron.
  • 1/4''-3'' pipe Jaw Capacity .
  • 6'' Pipe capacity using 4 Pins.
BENCH VICE -MULTIPURPOSE ROTATING

BENCH VICE -MULTIPURPOSE ROTATING

In Stock
  • Rotating Head .
  • Hardened Steel jaws-Replaceable.
  • Integrated Pipe Jas.
WORKSHOP BENCH VICE – 240° SWIVEL BASE

WORKSHOP BENCH VICE – 240° SWIVEL BASE

In Stock
  • Manufactured from steel grade cast iron.
  • Can also hold round pipes from 1/2'' to 1-3/4''.
  • A choice of every workshop / Garage / D.I.Y.
  • Weight 4.5 kg /9 lbs
STEEL BENCH VICE

STEEL BENCH VICE

In Stock
  • Manufactured from High Tensile Steel Plate
  • Swivel Base provides flexibility for locking at any desired angle by its low profile 360°.
  • Ideal for Machinist or Craftsmen.
OFFSET JAW VICE

OFFSET JAW VICE

In Stock
  • Robust Construction. Manufactured from Fabricated Steel
  • Offset feature provides the facility for holding long vertical work with the full width of the jaws without obstruction from the main body of the vice.
FLY TOOL CUTTER HOLDERS- TAPER SHANK

FLY TOOL CUTTER HOLDERS- TAPER SHANK

In Stock
 A fly cutter usually has two cutting heads and it is able to cut with a constant depth to face any surface to obtain a uniform surface.
FLY TOOL CUTTER TAPER

FLY TOOL CUTTER TAPER

In Stock
  • A fly cutter usually has two cutting heads and it is able to cut with a constant depth to face any surface to a obtain a uniform surface
  • fly cutters are used in automobile industry for various facing jobs
  • in motor industry fly cutters are used extensively
  • in almost all occasions they are used for the facing
3PC FLY TOOL CUTTER FOR ROUND BITS

3PC FLY TOOL CUTTER FOR ROUND BITS

In Stock
  • As the name suggest these are made for Round bits.
  • Very fine surface finish is obtain than the face mill.
FLY TOOL CUTTERS-WITH SUITABLE TOOL BITS

FLY TOOL CUTTERS-WITH SUITABLE TOOL BITS

In Stock
  • Purpose of Fly Cutters is very important in face Milling.
  • These are most commonly used by manual machinist.
MINI VERTICAL SLIDE

MINI VERTICAL SLIDE

In Stock
  • Suitable for Bench Lathes upto 150mm Swing
  • Vertical Travel 70mm
  • Base Dimension: 50x55mm
  • Sliding Table: 90x50mm
  • Dial Graduated to 0-50
  • High Grade casting and Smooth Finish.
LIVE TAILSTOCK

LIVE TAILSTOCK

In Stock
  • Manufactured from high grade steel hardened point hardened point to impart extra strength.
  • These have single row bearings & Taper Rolling to take up radial load and thrust bearings to absorb axial loads.
  • 3 jaws self centering 50mm lathe chuck.
LIVE CENTERS HIGH PRECISION (EXTENDED NOZZLE)

LIVE CENTERS HIGH PRECISION (EXTENDED NOZZLE)

In Stock
  • Body is constructed from hardened and ground steel.
  • eccentricity between .005 - .010
  • Nozzle is assembled with double angular contact bearing.
  • Needle roller bearing at the end of the points in the shank.
BEVEL REVOLVING TUBE PIPE CENTERS

BEVEL REVOLVING TUBE PIPE CENTERS

In Stock
  • Machining Pipes And Similar Hollow Shaft Materials With a High Thrust Capacity.
  • Bevel Section Is Ground After assembly Running In Its Own Bearing.
  • Designed to hold hollow & pipe Works.
  • Manufactured from heat treated high carbon Alloy steel.
LATHE CENTER / DEAD CENTER – FULL

LATHE CENTER / DEAD CENTER – FULL

In Stock
  • Solid Construction WIth No Moving Parts And Fully Hardened.
  • Tip Hardened to 60-63 HRC And Included Angle At Tip is 60°.
  • Hardened High Speed Centers Ensure Long Life.
  • Carbide Tipped Centers Give Longer Tool Life & Require Less Grinding.
  • Covers Widest Range Of Center Hole Sizes.
  • Eliminates Special Centers.
LATHE CENTER / DEAD CENTER – HALF

LATHE CENTER / DEAD CENTER – HALF

In Stock
  • Solid Construction With No Moving Parts And Fully Hardened.
  • Tip Hardened to 60-63 HRC And Included Angle At Tip is 60°.
  • Hardened High Speed Centers Ensure Long Life.

Filter Products

Categories

Product Status