Filter
Sort:
Show:
VICE MOUNTED BENDER

VICE MOUNTED BENDER

In Stock
  • The primary purpose of a vice-mounted wire bender is to bend wires accurately and consistently. It is often used in metalworking, jewelry making, and other crafts where precise wire shapes are required.
  • Design: These benders are designed to be mounted on a vice, providing stability and control during the bending process. The vice holds the wire securely in place while the bending mechanism shapes the wire   according to the desired pattern or angle.
  • Users typically insert the wire into the bender and secure it in the vice. The user then adjusts the position of the wire and applies pressure to create the desired bend.
INDEXABLE THREADING TOOL SET-11PC

INDEXABLE THREADING TOOL SET-11PC

In Stock
  • 1 x External Threading Tool Holder (ER)
  • 1 x Internal Threading Tool Holder (IR)
  • 2 x Internal Threading Insert.
  • 2 x External Threading Insert .
  • 4 x torx screws & 1 x Suitable Torx Key
INTERNAL THREADING TOOL

INTERNAL THREADING TOOL

In Stock
  • Internal Threading Tools are used for Internal Threading Operations
  • Whole tool Body Composite Of Solid Tool Holder & Carbide Insert.
  • Tool Holder Consists Of Superior Quality Alloy Steel.
EXTERNAL THREADING TOOL

EXTERNAL THREADING TOOL

In Stock
  • External Threading Tools are used for External Threading operations.
  • Whole Tool body Composite OF solid Tool holder & Carbide Insert.
  • Tool Holder Consists Of Superior Quality Alloy Steel.
TWIST DRILL GRINDING GAUGE

TWIST DRILL GRINDING GAUGE

In Stock
  • Measuring angle of drills up to Ø60mm.
  •  With Adjustable Pointer.
  •  Stainless steel.
STEEL PROTECTOR

STEEL PROTECTOR

In Stock
  • Measures angles from 0-180°
  • With Adjustable Screw.
  • Satin Chrome Finish.
  • Double Graduation 1°.
PROTRACTORS DEPTH GAUGE

PROTRACTORS DEPTH GAUGE

In Stock
  • Graduations are properly etched from 0° to 180°.
  • Available both in Carbon Steel & Stainless Steel.
  • Very useful instrument for measuring the depths.
ANGLE DEGREE PROTRACTORS (0 TO 180°)

ANGLE DEGREE PROTRACTORS (0 TO 180°)

In Stock
  • Stainless Steel & polished body.
  • Graduations are properly etched to give accurate measurements.
  • Move from 0 to 180°.
MINI VERTICAL SLIDE

MINI VERTICAL SLIDE

In Stock
  • Suitable for Bench Lathes upto 150mm Swing
  • Vertical Travel 70mm
  • Base Dimension: 50x55mm
  • Sliding Table: 90x50mm
  • Dial Graduated to 0-50
  • High Grade casting and Smooth Finish.
LIVE TAILSTOCK

LIVE TAILSTOCK

In Stock
  • Manufactured from high grade steel hardened point hardened point to impart extra strength.
  • These have single row bearings & Taper Rolling to take up radial load and thrust bearings to absorb axial loads.
  • 3 jaws self centering 50mm lathe chuck.
LIVE CENTERS HIGH PRECISION (EXTENDED NOZZLE)

LIVE CENTERS HIGH PRECISION (EXTENDED NOZZLE)

In Stock
  • Body is constructed from hardened and ground steel.
  • eccentricity between .005 - .010
  • Nozzle is assembled with double angular contact bearing.
  • Needle roller bearing at the end of the points in the shank.
BEVEL REVOLVING TUBE PIPE CENTERS

BEVEL REVOLVING TUBE PIPE CENTERS

In Stock
  • Machining Pipes And Similar Hollow Shaft Materials With a High Thrust Capacity.
  • Bevel Section Is Ground After assembly Running In Its Own Bearing.
  • Designed to hold hollow & pipe Works.
  • Manufactured from heat treated high carbon Alloy steel.
LATHE CENTER / DEAD CENTER – FULL

LATHE CENTER / DEAD CENTER – FULL

In Stock
  • Solid Construction WIth No Moving Parts And Fully Hardened.
  • Tip Hardened to 60-63 HRC And Included Angle At Tip is 60°.
  • Hardened High Speed Centers Ensure Long Life.
  • Carbide Tipped Centers Give Longer Tool Life & Require Less Grinding.
  • Covers Widest Range Of Center Hole Sizes.
  • Eliminates Special Centers.
LATHE CENTER / DEAD CENTER – HALF

LATHE CENTER / DEAD CENTER – HALF

In Stock
  • Solid Construction With No Moving Parts And Fully Hardened.
  • Tip Hardened to 60-63 HRC And Included Angle At Tip is 60°.
  • Hardened High Speed Centers Ensure Long Life.
REVOLVING CENTER 7 TIPS

REVOLVING CENTER 7 TIPS

In Stock
  • Set Contents - 5 Diff. live centers, 1 Pipe Center, 1 Female Center & 1 Ejecting Key.
  • Assembled with three bearings.
  • Ecentricity between .005 - .010 μ
  • Body is constructed from hardened and ground steel.
  • Widely used by Modelmakers & Woodworkers on mini lathes.
MINI LIVE CENTERS

MINI LIVE CENTERS

In Stock
  • Manufactured from Case Hardened Steel.
  • GRC-7887 is suitable for EMCO Compact & Similar Sized Lathes

Filter Products

Categories

Product Status