Filter
Sort:
Show:
SELF CENTERING LATHE CHUCKS – 3 JAWS

SELF CENTERING LATHE CHUCKS – 3 JAWS

In Stock
Our 3-Jaw scroll operated chucks are supplied with a 2-piece construction base jaws and are fitted with top reversible type master gripping hard jaws. These chucks offer flexibility and can be easily fitted with top soft jaws, which are normally used for mass production. We can provide Soft Jaw Blanks upon client's request, for optimal clamping accuracy after being re-machined.
MINI LATHE CHUCKS

MINI LATHE CHUCKS

In Stock
  • 50mm Self Centering Chuck 3 Jaw
  • 50mm Independent Chuck 4 Jaw
INDEPENDENT LATHE CHUCKS 4 JAW

INDEPENDENT LATHE CHUCKS 4 JAW

In Stock
  • Body manufactured from high-grade castings.
  • Jaws Manufactured from special grade of case hardening steel accurately.
  • Machined.
  • Each chuck is provided with key of suitable strength.
MINI LATHE CHUCK WITH SHANKS

MINI LATHE CHUCK WITH SHANKS

In Stock
  • Self Centering Scroll Type Mini Lathe Chuck.
  • Supplied With Wrenches.
  • Interchangeable Threaded Shanks.
VICE FOR VERTICAL SLIDE

VICE FOR VERTICAL SLIDE

In Stock
  • Manufactured from High Grade Heat Treated Alloy Steel
  • A vertical slide vice is a type of vice that is designed to hold and secure workpieces in a vertical orientation, typically for milling, drilling, or other machining operations.
VICE FOR MINI VERTICAL SLIDE

VICE FOR MINI VERTICAL SLIDE

In Stock
  • 4 Hole provided for mounting on Mini Vertical Slide.
  • A vise for a mini vertical slide is an essential accessory for holding workpieces securely during machining operations
  • Miniature vises are designed to be compact and lightweight, suitable for small-scale machining tasks.
  • Fits Directly over our Mini Vertical Slide No. GVS-0123
VICE FOR VERTICAL SLIDES

VICE FOR VERTICAL SLIDES

In Stock
  • Extra Jaw provided which helps to hold work piece in different angles.
  • 4 Slots provided for mounting on vertical slide both fixed & Swivel.
  • This Is Suitable For Any Of The Genuine Myford Vertical Slide.
VERTICAL SLIDE – SWIVEL BASE

VERTICAL SLIDE – SWIVEL BASE

In Stock
  • Manufactured from Closed Grain high tensile Seasoned Cast Iron
  • Widely used in Jig Boring, Grinding & Shaping Jobs.
VERTICAL SLIDE FIXED BASE

VERTICAL SLIDE FIXED BASE

In Stock
  • This attachment allows you to start milling on your lathe.
  • Table size 100 x125mm
  • Slide travel 100mm
MINI VERTICAL SLIDE

MINI VERTICAL SLIDE

In Stock
  • Suitable for Bench Lathes upto 150mm Swing
  • Vertical Travel 70mm
  • Base Dimension: 50x55mm
  • Sliding Table: 90x50mm
  • Dial Graduated to 0-50
  • High Grade casting and Smooth Finish.
LIVE TAILSTOCK

LIVE TAILSTOCK

In Stock
  • Manufactured from high grade steel hardened point hardened point to impart extra strength.
  • These have single row bearings & Taper Rolling to take up radial load and thrust bearings to absorb axial loads.
  • 3 jaws self centering 50mm lathe chuck.
LIVE CENTERS HIGH PRECISION (EXTENDED NOZZLE)

LIVE CENTERS HIGH PRECISION (EXTENDED NOZZLE)

In Stock
  • Body is constructed from hardened and ground steel.
  • eccentricity between .005 - .010
  • Nozzle is assembled with double angular contact bearing.
  • Needle roller bearing at the end of the points in the shank.
BEVEL REVOLVING TUBE PIPE CENTERS

BEVEL REVOLVING TUBE PIPE CENTERS

In Stock
  • Machining Pipes And Similar Hollow Shaft Materials With a High Thrust Capacity.
  • Bevel Section Is Ground After assembly Running In Its Own Bearing.
  • Designed to hold hollow & pipe Works.
  • Manufactured from heat treated high carbon Alloy steel.
LATHE CENTER / DEAD CENTER – FULL

LATHE CENTER / DEAD CENTER – FULL

In Stock
  • Solid Construction WIth No Moving Parts And Fully Hardened.
  • Tip Hardened to 60-63 HRC And Included Angle At Tip is 60°.
  • Hardened High Speed Centers Ensure Long Life.
  • Carbide Tipped Centers Give Longer Tool Life & Require Less Grinding.
  • Covers Widest Range Of Center Hole Sizes.
  • Eliminates Special Centers.
LATHE CENTER / DEAD CENTER – HALF

LATHE CENTER / DEAD CENTER – HALF

In Stock
  • Solid Construction With No Moving Parts And Fully Hardened.
  • Tip Hardened to 60-63 HRC And Included Angle At Tip is 60°.
  • Hardened High Speed Centers Ensure Long Life.
REVOLVING CENTER 7 TIPS

REVOLVING CENTER 7 TIPS

In Stock
  • Set Contents - 5 Diff. live centers, 1 Pipe Center, 1 Female Center & 1 Ejecting Key.
  • Assembled with three bearings.
  • Ecentricity between .005 - .010 μ
  • Body is constructed from hardened and ground steel.
  • Widely used by Modelmakers & Woodworkers on mini lathes.

Filter Products

Categories

Product Status