Filter
Sort:
Show:
VICE MOUNTED BENDER

VICE MOUNTED BENDER

In Stock
  • The primary purpose of a vice-mounted wire bender is to bend wires accurately and consistently. It is often used in metalworking, jewelry making, and other crafts where precise wire shapes are required.
  • Design: These benders are designed to be mounted on a vice, providing stability and control during the bending process. The vice holds the wire securely in place while the bending mechanism shapes the wire   according to the desired pattern or angle.
  • Users typically insert the wire into the bender and secure it in the vice. The user then adjusts the position of the wire and applies pressure to create the desired bend.
SINE VICE -PIN TYPE

SINE VICE -PIN TYPE

In Stock
  • Manufactured from Hardened & Ground Tool Steel .
  • Mounted on Hardened, ground rollers the vice can be inclined in the position with the help of side strap clamp.
  • The recess of 1mm depth is made in base plate for minute angle adjustment
TOOL MAKERS STEEL VICE -SCREW LESS TYPE

TOOL MAKERS STEEL VICE -SCREW LESS TYPE

In Stock
  • Hardened & Ground Steel Vice .
  • The rapid positioning notched allow the vice to be locked at any desired  position by allen key .
  • V-Grooves in jaws facilitates holding of round jobs
TOOL MAKERS STEEL VICE -SCREW TYPE

TOOL MAKERS STEEL VICE -SCREW TYPE

In Stock
  • Manufactured from selected tool steel hardened 55-60 hrc.
  • Accuracy for squareness, flatness & parallelism within 0.010mm
  • Wear plate at bottom to prevent lifting of jaw.
HIGH-PRECISION GRINDING AND CONTROL VISE

HIGH-PRECISION GRINDING AND CONTROL VISE

In Stock
A Very High Precision Grinding Vice for Accurate Grinding Jobs. Tool steel, through-hardened, fully precision-ground.
SELF CENTERING LATHE CHUCKS – 3 JAWS

SELF CENTERING LATHE CHUCKS – 3 JAWS

In Stock
Our 3-Jaw scroll operated chucks are supplied with a 2-piece construction base jaws and are fitted with top reversible type master gripping hard jaws. These chucks offer flexibility and can be easily fitted with top soft jaws, which are normally used for mass production. We can provide Soft Jaw Blanks upon client's request, for optimal clamping accuracy after being re-machined.
MINI LATHE CHUCKS

MINI LATHE CHUCKS

In Stock
  • 50mm Self Centering Chuck 3 Jaw
  • 50mm Independent Chuck 4 Jaw
INDEPENDENT LATHE CHUCKS 4 JAW

INDEPENDENT LATHE CHUCKS 4 JAW

In Stock
  • Body manufactured from high-grade castings.
  • Jaws Manufactured from special grade of case hardening steel accurately.
  • Machined.
  • Each chuck is provided with key of suitable strength.
MINI LATHE CHUCK WITH SHANKS

MINI LATHE CHUCK WITH SHANKS

In Stock
  • Self Centering Scroll Type Mini Lathe Chuck.
  • Supplied With Wrenches.
  • Interchangeable Threaded Shanks.
Surface Plate / Granite

Surface Plate / Granite

In Stock
  • Manufactured from superior quality granite.
  • Used for checking parallelism & angles.
  • Used to mount up optical gauging systems in workshops.
 
Surface Plate / Cast Iron – Round

Surface Plate / Cast Iron – Round

In Stock
  • Manufactured from superior quality granite.
  • Used for checking parallelism & angles.
  • Used to mount up optical gauging systems in workshops.
  • Also available stand for corresponding sizes.
  • Bigger & other sizes are manufactured on request.
Surface Plate / Cast Iron – Box Type

Surface Plate / Cast Iron – Box Type

In Stock
  • Manufactured from Superior Quality Seasoned Cast Iron.
  • Top Surface is Thick & Solid
  • Used for Checking Parallelism & Angles and also to mount up optical systems in workshops.
Universal sheet metal machine – Rolling, Bending & Cutting 3 in 1

Universal sheet metal machine – Rolling, Bending & Cutting 3 in 1

In Stock
  • 3 x  Rollers including rear pinch roll and top slip out roll.
  • 4 x holes for locking the equipment.
  • Segmented press brake tooling for box and pan folding up to 90°.
Metal Brake Bender Vise Mount

Metal Brake Bender Vise Mount

In Stock
  • The bending jaw is equipped with magnets that ensure a secure hold in the vice. This keeps the jaw stable during the bending process and ensures a controlled and safe working environment
  • Bending jaw offers the possibility to perform precise bends on materials such as mild steel.
  • With a maximum bending capacity of 3 mm, you can achieve accurate and professional results
Mini rolling & bending machine

Mini rolling & bending machine

In Stock
  • An easier-to-use tool for making perfect bends in ship model planking.
  • Works on wood strips up to 2-1/4 inches wide and 1/8 inch thick
  • It will also make smooth, no kink curves in plastic and metal strip stock and in 1/16 inch, 3/32 inch and 1/8 inch tubing and soft wire.
Plate Bench Shear – Spring Type

Plate Bench Shear – Spring Type

In Stock
  • Light weight powerful shears for cutting sheets, metal rods & bars
  • Blade are manufactured from hardened tool steel and are held in a open position by a strong spring to help prevent accidents

Filter Products

Categories

Product Status