Filter
Sort:
Show:
SINE VICE -PIN TYPE

SINE VICE -PIN TYPE

In Stock
  • Manufactured from Hardened & Ground Tool Steel .
  • Mounted on Hardened, ground rollers the vice can be inclined in the position with the help of side strap clamp.
  • The recess of 1mm depth is made in base plate for minute angle adjustment
TOOL MAKERS STEEL VICE -SCREW LESS TYPE

TOOL MAKERS STEEL VICE -SCREW LESS TYPE

In Stock
  • Hardened & Ground Steel Vice .
  • The rapid positioning notched allow the vice to be locked at any desired  position by allen key .
  • V-Grooves in jaws facilitates holding of round jobs
TOOL MAKERS STEEL VICE -SCREW TYPE

TOOL MAKERS STEEL VICE -SCREW TYPE

In Stock
  • Manufactured from selected tool steel hardened 55-60 hrc.
  • Accuracy for squareness, flatness & parallelism within 0.010mm
  • Wear plate at bottom to prevent lifting of jaw.
HIGH-PRECISION GRINDING AND CONTROL VISE

HIGH-PRECISION GRINDING AND CONTROL VISE

In Stock
A Very High Precision Grinding Vice for Accurate Grinding Jobs. Tool steel, through-hardened, fully precision-ground.
THICKNESS GAUGES / FEELER GUAGES

THICKNESS GAUGES / FEELER GUAGES

In Stock
CENTER GAUGE

CENTER GAUGE

In Stock
  • Use to grind and position thread cutting tool on a lathe.
  • Hardened with lapped edges and notches.
ADJUSTABLE TAILSTOCK

ADJUSTABLE TAILSTOCK

In Stock
  • Mini tailstock are relatively inexpensive than any other tailstock.
  • Relatively small & light so they fit into the budgets.
 
ADJUSTABLE TAILSTOCK

ADJUSTABLE TAILSTOCK

In Stock
  • Mini tailstock are relatively inexpensive than any other tailstock.
  • Relatively small & light so they fit into the budgets.
MINI TAILSTOCK TILTING

MINI TAILSTOCK TILTING

In Stock
  • Manufactured from Seasoned Cast Iron
  • Adjustable to Height 38-63mm
Solid Angle Plates

Solid Angle Plates

In Stock
  • Manufactured from good quality seasoned casting.
  • Properly hardened & ground from all the sides.
  • Properly Machined 900Square.
  • Precision groundsides & end.
 
Iron Casted Slotted Angle Plates

Iron Casted Slotted Angle Plates

In Stock
  • Manufactured from good quality seasoned casting.
  • Properly hardened & ground from all the sides.
  • Properly Machined 900Square.
V- Angle Plates

V- Angle Plates

In Stock
  • Manufactured from good quality seasoned casting.
  • Combined Vee Block & Angle Plate.
Stepped Angle Plates

Stepped Angle Plates

In Stock
  • Hardened and Precision ground.
  • Tapped holes for clamping jobs in any position
Screw pitch gauge

Screw pitch gauge

In Stock
  • Constructed from good quality steel.
  • Each and every leaf is properly marked with size.
  • Packed in Attractive PVC Jacket.
  • Used to check the threads of the screws.
Diamond Weight Gauge with Block

Diamond Weight Gauge with Block

In Stock
  • This gauge is ideal if you need to know accurately a diamond size.
  • It is very easy to use by placing the gauge at side and then at the top of diamond.
  • Diamond weight gauge is with reference booklet.
  • The size can then be found by checking the reference booklet.
  • Width and depth are measured with caliper and compared with measurements in table.
Marking Gauge

Marking Gauge

In Stock
  • Graduations are properly etched to give accurate measurements.
  • Scale manufactured of stainless steel .
  • Marking edge with metric graduations.

Filter Products

Categories

Product Status