Filter
Sort:
Show:
PROFILING TOOL- RIGHT

PROFILING TOOL- RIGHT

In Stock
  • Supplied complete with suitable insert, screw & torx key
PROFILING TOOL – STRAIGHT

PROFILING TOOL – STRAIGHT

In Stock
  • Supplied complete with suitable insert, screw & torx key
SINE VICE -PIN TYPE

SINE VICE -PIN TYPE

In Stock
  • Manufactured from Hardened & Ground Tool Steel .
  • Mounted on Hardened, ground rollers the vice can be inclined in the position with the help of side strap clamp.
  • The recess of 1mm depth is made in base plate for minute angle adjustment
TOOL MAKERS STEEL VICE -SCREW LESS TYPE

TOOL MAKERS STEEL VICE -SCREW LESS TYPE

In Stock
  • Hardened & Ground Steel Vice .
  • The rapid positioning notched allow the vice to be locked at any desired  position by allen key .
  • V-Grooves in jaws facilitates holding of round jobs
TOOL MAKERS STEEL VICE -SCREW TYPE

TOOL MAKERS STEEL VICE -SCREW TYPE

In Stock
  • Manufactured from selected tool steel hardened 55-60 hrc.
  • Accuracy for squareness, flatness & parallelism within 0.010mm
  • Wear plate at bottom to prevent lifting of jaw.
HIGH-PRECISION GRINDING AND CONTROL VISE

HIGH-PRECISION GRINDING AND CONTROL VISE

In Stock
A Very High Precision Grinding Vice for Accurate Grinding Jobs. Tool steel, through-hardened, fully precision-ground.
ENGINEER’S STEEL PARALLELS & SETS

ENGINEER’S STEEL PARALLELS & SETS

In Stock
  • Very useful milling & drilling .
  • Made from alloy steel.
  • Properly hardened & ground.
ADJUSTABLE TAILSTOCK

ADJUSTABLE TAILSTOCK

In Stock
  • Mini tailstock are relatively inexpensive than any other tailstock.
  • Relatively small & light so they fit into the budgets.
 
ADJUSTABLE TAILSTOCK

ADJUSTABLE TAILSTOCK

In Stock
  • Mini tailstock are relatively inexpensive than any other tailstock.
  • Relatively small & light so they fit into the budgets.
MINI TAILSTOCK TILTING

MINI TAILSTOCK TILTING

In Stock
  • Manufactured from Seasoned Cast Iron
  • Adjustable to Height 38-63mm
Engineer’s Steel Parallels & Sets

Engineer’s Steel Parallels & Sets

In Stock
This set features a variety of sizes, including 1/2 in., 5/8 in., 3/4 in., 7/8 in., 1 in., 1-1/8 in., 1-1/4 in., 1-3/8 in., 1-1/2 in. and 1-5/8 in. W. Each parallel measures in at 6 in. L and 1/8 in. thick.
Wavy Parallel Set of 8 Pairs

Wavy Parallel Set of 8 Pairs

In Stock
For supporting a work piece in a machine vice, to elevate the workpiece above the vice jaws.
V Sine Bars

V Sine Bars

In Stock
  • Hardened & ground.
  • Clamp included.
  • Accurate to .0005"
  • 1" round capacity
Sine Bars

Sine Bars

In Stock
Use of product - Combo Edge Finder installs in Collet or chuck of milling machine. Precisely locates edge of workpiece relative to center of spindle. Works in both feed directions for quick and easy use.  
Adjustable Tailstock

Adjustable Tailstock

In Stock
  • Mini tailstock are relatively inexpensive than any other tailstock.
  • Relatively small & light so they fit into the budgets.
 
Tailstock Adjustable For Rotary Table 8″

Tailstock Adjustable For Rotary Table 8″

In Stock
Manufactured from High Grade Close Grain Cast Iron

Filter Products

Categories

Product Status