Filter
Sort:
Show:
VICE MOUNTED BENDER

VICE MOUNTED BENDER

In Stock
  • The primary purpose of a vice-mounted wire bender is to bend wires accurately and consistently. It is often used in metalworking, jewelry making, and other crafts where precise wire shapes are required.
  • Design: These benders are designed to be mounted on a vice, providing stability and control during the bending process. The vice holds the wire securely in place while the bending mechanism shapes the wire   according to the desired pattern or angle.
  • Users typically insert the wire into the bender and secure it in the vice. The user then adjusts the position of the wire and applies pressure to create the desired bend.
COMBINED DRILLS&COUNTER SINKS-(A) PLANE TYPE (AS PER ANSI B94.11M)

COMBINED DRILLS&COUNTER SINKS-(A) PLANE TYPE (AS PER ANSI B94.11M)

In Stock
  • Manufactured from High Quality High Speed Steel (HSS)
  • Commonly used for deburring and chamfering applications in metalworking.
COMBINED DRILLS & COUNTER SINKS-(C)PLANE TYPE 60° LONG SERIES

COMBINED DRILLS & COUNTER SINKS-(C)PLANE TYPE 60° LONG SERIES

In Stock
  • Manufactured from High Quality High Speed Steel (HSS)
  • Commonly used for deburring and chamfering applications in metalworking.
CENTER DRILL -TYPE ‘B’

CENTER DRILL -TYPE ‘B’

In Stock
  • Manufactured from High Quality High Speed Steel (HSS)
  • Commonly used for deburring and chamfering applications in metalworking.
COMBINED CENTER DRILLS & COUNTER SINKS- BELL TYPE 60°

COMBINED CENTER DRILLS & COUNTER SINKS- BELL TYPE 60°

In Stock
  • Manufactured from High Quality High Speed Steel (HSS)
  • Commonly used for deburring and chamfering applications in metalworking.
HSS CENTER DRILL – DIN333 FORM A

HSS CENTER DRILL – DIN333 FORM A

In Stock
  • Manufactured from high speed steel for increased tool durability.
  • Manufactured as per DIN 333 Standards.
  • Center drills have a conical shape with a pilot tip that creates a small, precise indentation in the workpiece.
HSS CENTER DRILLS – BS SERIES

HSS CENTER DRILLS – BS SERIES

In Stock
  • Manufactured from high speed steel for increased tool durability.
  • Manufactured as per BS328 Standards. 60° inclusive angle
  • Center drills have a conical shape with a pilot tip that creates a small, precise indentation in the workpiece.
SINE VICE -PIN TYPE

SINE VICE -PIN TYPE

In Stock
  • Manufactured from Hardened & Ground Tool Steel .
  • Mounted on Hardened, ground rollers the vice can be inclined in the position with the help of side strap clamp.
  • The recess of 1mm depth is made in base plate for minute angle adjustment
TOOL MAKERS STEEL VICE -SCREW LESS TYPE

TOOL MAKERS STEEL VICE -SCREW LESS TYPE

In Stock
  • Hardened & Ground Steel Vice .
  • The rapid positioning notched allow the vice to be locked at any desired  position by allen key .
  • V-Grooves in jaws facilitates holding of round jobs
TOOL MAKERS STEEL VICE -SCREW TYPE

TOOL MAKERS STEEL VICE -SCREW TYPE

In Stock
  • Manufactured from selected tool steel hardened 55-60 hrc.
  • Accuracy for squareness, flatness & parallelism within 0.010mm
  • Wear plate at bottom to prevent lifting of jaw.
HIGH-PRECISION GRINDING AND CONTROL VISE

HIGH-PRECISION GRINDING AND CONTROL VISE

In Stock
A Very High Precision Grinding Vice for Accurate Grinding Jobs. Tool steel, through-hardened, fully precision-ground.
ENGINEER’S MEASURING & MARKING SET OF 11 PCS

ENGINEER’S MEASURING & MARKING SET OF 11 PCS

In Stock
Measuring And Marking Set Of 5 Pcs

Measuring And Marking Set Of 5 Pcs

In Stock
  •  1 off Engineers Square 6'/150mm.
  •  1 off Center finder square 1-1/2'/38mm.
  •  1 off Carbide Magnetic Scriber.
  •  1 off Center Punch.
  •  1 off Stainless Steel Protector.
Bench Block

Bench Block

In Stock
  • Useful for holding work while driving pins, drilling etc.
  • Hardened 7 ground knurled body for a easy grip.
  • Vee-groove across the face accommodates round & odd shaped stock.
  • Recessed base for lightweight.
Center Square Set – 6pcs

Center Square Set – 6pcs

In Stock
Includes 3 precision try squares (3", 4", and 6"), 1 center square with a 1.5"/80 mm blade, 1 carbide scriber pen, and 1 Y center finder with Plastic Suitcase.  
Universal sheet metal machine – Rolling, Bending & Cutting 3 in 1

Universal sheet metal machine – Rolling, Bending & Cutting 3 in 1

In Stock
  • 3 x  Rollers including rear pinch roll and top slip out roll.
  • 4 x holes for locking the equipment.
  • Segmented press brake tooling for box and pan folding up to 90°.

Filter Products

Categories

Product Status