Filter

Showing 1–16 of 86 resultsSorted by latest

Sort:
Show:
Tail Stock Die Holder Set – Deluxe or Pin Type (Inches)

Tail Stock Die Holder Set – Deluxe or Pin Type (Inches)

In Stock
Lathe Tail Stock Tap & Die Holder Set of 7 pcs

Lathe Tail Stock Tap & Die Holder Set of 7 pcs

In Stock
Die Holder Straight Shank

Die Holder Straight Shank

In Stock
HSS BORING BAR SET FOR BORING HEAD

HSS BORING BAR SET FOR BORING HEAD

In Stock
  • All knurls are produced from M2 (High Speed Steel) and hardened to 62 HRC. All knurls are tested to assure work of uniform precision. Manufacturing tolerances are highly precise for knurl thickness and hole diameter. The hole is always concentric and the patterns on the knurls are created under rolled cut method. We offer knurls of straight pattern, Left hand spiral, Right hand spiral and Cross knurl.
RADIAL BORING BAR FOR BORING HEAD

RADIAL BORING BAR FOR BORING HEAD

In Stock
  • All knurls are produced from M2 (High Speed Steel) and hardened to 62 HRC. All knurls are tested to assure work of uniform precision. Manufacturing tolerances are highly precise for knurl thickness and hole diameter. The hole is always concentric and the patterns on the knurls are created under rolled cut method. We offer knurls of straight pattern, Left hand spiral, Right hand spiral and Cross knurl.
BORING HEAD SHANKS

BORING HEAD SHANKS

In Stock
  • All knurls are produced from M2 (High Speed Steel) and hardened to 62 HRC. All knurls are tested to assure work of uniform precision. Manufacturing tolerances are highly precise for knurl thickness and hole diameter. The hole is always concentric and the patterns on the knurls are created under rolled cut method. We offer knurls of straight pattern, Left hand spiral, Right hand spiral and Cross knurl.
Spare Knurls

Spare Knurls

In Stock
  • All knurls are produced from M2 (High Speed Steel) and hardened to 62 HRC. All knurls are tested to assure work of uniform precision. Manufacturing tolerances are highly precise for knurl thickness and hole diameter. The hole is always concentric and the patterns on the knurls are created under rolled cut method. We offer knurls of straight pattern, Left hand spiral, Right hand spiral and Cross knurl.
Sensitive Drill Attachment

Sensitive Drill Attachment

In Stock
Radius Turning attachment

Radius Turning attachment

In Stock

Features

  • Easily Cuts ball-shaped objects or turns a radius on the end of a work piece.
  • Swing the handle to rotate the cutter.
Ball Turning Attachment -TNMG Insert

Ball Turning Attachment -TNMG Insert

In Stock

Features

  • Ball Turning Attachment uses CNMG Insert to quickly Turn Balls & Cones
  • Designed for the Lathes having Center Height 3-1/2″
Taper Turning Attachment

Taper Turning Attachment

In Stock
  • Easiest Way to To do Taper Turning , without offsetting the Tailstock.
  • Adjustable Screws on Both Sides for Fine Adjustments.
Taper Turning Attachment With Revolving Center

Taper Turning Attachment With Revolving Center

In Stock
  • Slide Can be Shifted 25mm Left & Right,
  • 1 Handle Rotation will off set the attachment by 1mm.
Turret Head Quick Change Tail Stock-3 Head

Turret Head Quick Change Tail Stock-3 Head

In Stock
  • 1 x Drill Sleeve MT2-3.
  • 1x13mm drill chuck with key.
  • 1xDie holder 13/16″.
  • 1xLive Center
Turret Head Quick Change Tail Stock -4 Head

Turret Head Quick Change Tail Stock -4 Head

In Stock
Rotary Table – 4-3/8″(110mm)

Rotary Table – 4-3/8″(110mm)

In Stock
  • This Rotary Table is manufactured from close grained graded cast iron.
  • Chuck Diamater 110mm / 4″.
  • Rotary Table can be used either Horizontal or Vertical.
Rotary Table Tilting – 4-3/8″(110mm)

Rotary Table Tilting – 4-3/8″(110mm)

In Stock
  • Chuck Diameter : 100mm / 4″
  • Vertical center Height : 2-1/16″ (Approx. 51mm)

Filter Products

Categories

Product Status