Filter

Showing 1–16 of 28 resultsSorted by latest

Sort:
Show:
Spare Knurls

Spare Knurls

In Stock
  • All knurls are produced from M2 (High Speed Steel) and hardened to 62 HRC. All knurls are tested to assure work of uniform precision. Manufacturing tolerances are highly precise for knurl thickness and hole diameter. The hole is always concentric and the patterns on the knurls are created under rolled cut method. We offer knurls of straight pattern, Left hand spiral, Right hand spiral and Cross knurl.
Dividing Plate Set (3 Dividing Plate) For Rotary Tables

Dividing Plate Set (3 Dividing Plate) For Rotary Tables

In Stock
  • Made to fit our 150mm Rotary Table and Tilting Rotary Tables 100mm.
Angle Degree Protractors (0 To 180°)

Angle Degree Protractors (0 To 180°)

In Stock
  • Stainless Steel & polished body.
  • Graduations are properly etched to give accurate measurements.
  • Move from 0 to 180&deg.
Steel Protractor

Steel Protractor

In Stock
  • Measures angles from 0-180°.
  • With Adjustable Screw.
  • Satin Chrome Finish.
Rotary Table – 4-3/8″(110mm)

Rotary Table – 4-3/8″(110mm)

In Stock
  • This Rotary Table is manufactured from close grained graded cast iron.
  • Chuck Diamater 110mm / 4″.
  • Rotary Table can be used either Horizontal or Vertical.
Rotary Table Tilting – 4-3/8″(110mm)

Rotary Table Tilting – 4-3/8″(110mm)

In Stock
  • Chuck Diameter : 100mm / 4″
  • Vertical center Height : 2-1/16″ (Approx. 51mm)
Rotary Table Tilting – 4”/100mm

Rotary Table Tilting – 4”/100mm

In Stock
  • Chuck Diameter : 100mm / 4″
  • 66mm Overall height in flat position. This relatively low height increases the working capacity for machines.
  • Base dimension : 145mm x 126mm
Rotary Table – 4″/100mm

Rotary Table – 4″/100mm

In Stock
  • Chuck Diameter : 100mm / 4″
  • Vertical center Height : 2-1/16″ (Approx. 51mm)
  • Hand Wheel can be set to Zero
Rotary Table Tilting MT-2 Bore – 4″/100mm

Rotary Table Tilting MT-2 Bore – 4″/100mm

In Stock
  • Can be Tilted from 0 to 180°.
  • Engage & Disengage Function for manual indexing.
Rotary Table – 6″/150mm

Rotary Table – 6″/150mm

In Stock
  • Engage & Disengage Function for manual indexing.
  • Mainly used for  precision work positioning in metalworking.
Rapid Indexer Horizontal & Vertical

Rapid Indexer Horizontal & Vertical

In Stock
  • Rapid Indexer With Chuck
  • Gear Ratio 24:1
  • Manufacturing from closed grained cast iron.
Rotary Table Tilting – 3″/75mm

Rotary Table Tilting – 3″/75mm

In Stock
  • Precision tilting capability allows accurate angled machining, contouring, and multi-axis setups with smooth, controlled adjustment.
  • Enables precise angular positioning for complex machining operations.
Rotary Table – 8″/200mm

Rotary Table – 8″/200mm

In Stock
  • 8” / 200mm Rotary Table– Suitable for precision milling, drilling, and indexing operations.
  • Horizontal & Vertical Use– Can be mounted in both positions for versatile machining setups.
Rotary Table – 10″/250mm

Rotary Table – 10″/250mm

In Stock
  • 10” / 250mm Rotary Table– Precision-machined for accurate indexing, drilling, milling, and circular cutting.
  • Horizontal & Vertical Operation– Can be mounted flat or upright for versatile machining applications.
Rotary Table – 3″/75mm

Rotary Table – 3″/75mm

In Stock
  • High Precision Quality Made Low Profile Rotary Table
  • Table Height : 42mm
  • Table Height With Chuck : 95mm
KNURLING KIT WITH FIVE KNURLS

KNURLING KIT WITH FIVE KNURLS

In Stock

Features

  • Knurling kit with five knurls Straight Coarse, Fine, Cross Fine, Medium, Coarse and with spare pins. Single Knurling holder

Filter Products

Categories

Product Status