Filter

Showing 1–16 of 41 resultsSorted by latest

Sort:
Show:
Tail Stock Die Holder Set – Deluxe or Pin Type (Inches)

Tail Stock Die Holder Set – Deluxe or Pin Type (Inches)

In Stock
Lathe Tail Stock Tap & Die Holder Set of 7 pcs

Lathe Tail Stock Tap & Die Holder Set of 7 pcs

In Stock
Die Holder Straight Shank

Die Holder Straight Shank

In Stock
HSS BORING BAR SET FOR BORING HEAD

HSS BORING BAR SET FOR BORING HEAD

In Stock
  • All knurls are produced from M2 (High Speed Steel) and hardened to 62 HRC. All knurls are tested to assure work of uniform precision. Manufacturing tolerances are highly precise for knurl thickness and hole diameter. The hole is always concentric and the patterns on the knurls are created under rolled cut method. We offer knurls of straight pattern, Left hand spiral, Right hand spiral and Cross knurl.
RADIAL BORING BAR FOR BORING HEAD

RADIAL BORING BAR FOR BORING HEAD

In Stock
  • All knurls are produced from M2 (High Speed Steel) and hardened to 62 HRC. All knurls are tested to assure work of uniform precision. Manufacturing tolerances are highly precise for knurl thickness and hole diameter. The hole is always concentric and the patterns on the knurls are created under rolled cut method. We offer knurls of straight pattern, Left hand spiral, Right hand spiral and Cross knurl.
BORING HEAD SHANKS

BORING HEAD SHANKS

In Stock
  • All knurls are produced from M2 (High Speed Steel) and hardened to 62 HRC. All knurls are tested to assure work of uniform precision. Manufacturing tolerances are highly precise for knurl thickness and hole diameter. The hole is always concentric and the patterns on the knurls are created under rolled cut method. We offer knurls of straight pattern, Left hand spiral, Right hand spiral and Cross knurl.
Turret Head Quick Change Tail Stock-3 Head

Turret Head Quick Change Tail Stock-3 Head

In Stock
  • 1 x Drill Sleeve MT2-3.
  • 1x13mm drill chuck with key.
  • 1xDie holder 13/16″.
  • 1xLive Center
Turret Head Quick Change Tail Stock -4 Head

Turret Head Quick Change Tail Stock -4 Head

In Stock
Rotary Table – 4-3/8″(110mm)

Rotary Table – 4-3/8″(110mm)

In Stock
  • This Rotary Table is manufactured from close grained graded cast iron.
  • Chuck Diamater 110mm / 4″.
  • Rotary Table can be used either Horizontal or Vertical.
Rotary Table Tilting – 4-3/8″(110mm)

Rotary Table Tilting – 4-3/8″(110mm)

In Stock
  • Chuck Diameter : 100mm / 4″
  • Vertical center Height : 2-1/16″ (Approx. 51mm)
Rotary Table Tilting – 4”/100mm

Rotary Table Tilting – 4”/100mm

In Stock
  • Chuck Diameter : 100mm / 4″
  • 66mm Overall height in flat position. This relatively low height increases the working capacity for machines.
  • Base dimension : 145mm x 126mm
Rotary Table – 4″/100mm

Rotary Table – 4″/100mm

In Stock
  • Chuck Diameter : 100mm / 4″
  • Vertical center Height : 2-1/16″ (Approx. 51mm)
  • Hand Wheel can be set to Zero
Rotary Table Tilting MT-2 Bore – 4″/100mm

Rotary Table Tilting MT-2 Bore – 4″/100mm

In Stock
  • Can be Tilted from 0 to 180°.
  • Engage & Disengage Function for manual indexing.
Rotary Table – 6″/150mm

Rotary Table – 6″/150mm

In Stock
  • Engage & Disengage Function for manual indexing.
  • Mainly used for  precision work positioning in metalworking.
Rapid Indexer Horizontal & Vertical

Rapid Indexer Horizontal & Vertical

In Stock
  • Rapid Indexer With Chuck
  • Gear Ratio 24:1
  • Manufacturing from closed grained cast iron.
Rotary Table Tilting – 3″/75mm

Rotary Table Tilting – 3″/75mm

In Stock
  • Precision tilting capability allows accurate angled machining, contouring, and multi-axis setups with smooth, controlled adjustment.
  • Enables precise angular positioning for complex machining operations.

Filter Products

Categories

Product Status