Filter

Showing 1–16 of 31 resultsSorted by latest

Sort:
Show:
HSS BORING BAR SET FOR BORING HEAD

HSS BORING BAR SET FOR BORING HEAD

In Stock
  • All knurls are produced from M2 (High Speed Steel) and hardened to 62 HRC. All knurls are tested to assure work of uniform precision. Manufacturing tolerances are highly precise for knurl thickness and hole diameter. The hole is always concentric and the patterns on the knurls are created under rolled cut method. We offer knurls of straight pattern, Left hand spiral, Right hand spiral and Cross knurl.
RADIAL BORING BAR FOR BORING HEAD

RADIAL BORING BAR FOR BORING HEAD

In Stock
  • All knurls are produced from M2 (High Speed Steel) and hardened to 62 HRC. All knurls are tested to assure work of uniform precision. Manufacturing tolerances are highly precise for knurl thickness and hole diameter. The hole is always concentric and the patterns on the knurls are created under rolled cut method. We offer knurls of straight pattern, Left hand spiral, Right hand spiral and Cross knurl.
BORING HEAD SHANKS

BORING HEAD SHANKS

In Stock
  • All knurls are produced from M2 (High Speed Steel) and hardened to 62 HRC. All knurls are tested to assure work of uniform precision. Manufacturing tolerances are highly precise for knurl thickness and hole diameter. The hole is always concentric and the patterns on the knurls are created under rolled cut method. We offer knurls of straight pattern, Left hand spiral, Right hand spiral and Cross knurl.
Collet Chuck Adapter -For Rotary Tables

Collet Chuck Adapter -For Rotary Tables

In Stock
  • Precision Made Component For Rotary Tables
  • 3 Different Types of Collets ER16, ER25 AND ER32
Back Plate -Steel

Back Plate -Steel

In Stock
  • Precision Turned Backplates which allow Chuck to sit precisely.
  • Supplied with Suitable T Nuts & Washers.
Back Plate – Aluminum with MT-2 Pin – DIN 6350

Back Plate – Aluminum with MT-2 Pin – DIN 6350

In Stock
  • Manufactured in Alloy Grade Aluminum stability to provide strength.
  • This Back plate provides a simple interface to mount 5″ & 6″ lathe chucks.
  • 1/2″ / 12mm Thickness
  • Includes: 4 × Flange Nut, 4 × Stud, 4 × T-Nut (3/8″ Wd.)
Taper Turning Attachment

Taper Turning Attachment

In Stock
  • Easiest Way to To do Taper Turning , without offsetting the Tailstock.
  • Adjustable Screws on Both Sides for Fine Adjustments.
Taper Turning Attachment With Revolving Center

Taper Turning Attachment With Revolving Center

In Stock
  • Slide Can be Shifted 25mm Left & Right,
  • 1 Handle Rotation will off set the attachment by 1mm.
Rotary Table – 4-3/8″(110mm)

Rotary Table – 4-3/8″(110mm)

In Stock
  • This Rotary Table is manufactured from close grained graded cast iron.
  • Chuck Diamater 110mm / 4″.
  • Rotary Table can be used either Horizontal or Vertical.
Rotary Table Tilting – 4-3/8″(110mm)

Rotary Table Tilting – 4-3/8″(110mm)

In Stock
  • Chuck Diameter : 100mm / 4″
  • Vertical center Height : 2-1/16″ (Approx. 51mm)
Rotary Table Tilting – 4”/100mm

Rotary Table Tilting – 4”/100mm

In Stock
  • Chuck Diameter : 100mm / 4″
  • 66mm Overall height in flat position. This relatively low height increases the working capacity for machines.
  • Base dimension : 145mm x 126mm
Rotary Table – 4″/100mm

Rotary Table – 4″/100mm

In Stock
  • Chuck Diameter : 100mm / 4″
  • Vertical center Height : 2-1/16″ (Approx. 51mm)
  • Hand Wheel can be set to Zero
Rotary Table Tilting MT-2 Bore – 4″/100mm

Rotary Table Tilting MT-2 Bore – 4″/100mm

In Stock
  • Can be Tilted from 0 to 180°.
  • Engage & Disengage Function for manual indexing.
Rotary Table – 6″/150mm

Rotary Table – 6″/150mm

In Stock
  • Engage & Disengage Function for manual indexing.
  • Mainly used for  precision work positioning in metalworking.
Rapid Indexer Horizontal & Vertical

Rapid Indexer Horizontal & Vertical

In Stock
  • Rapid Indexer With Chuck
  • Gear Ratio 24:1
  • Manufacturing from closed grained cast iron.
Rotary Table Tilting – 3″/75mm

Rotary Table Tilting – 3″/75mm

In Stock
  • Precision tilting capability allows accurate angled machining, contouring, and multi-axis setups with smooth, controlled adjustment.
  • Enables precise angular positioning for complex machining operations.

Filter Products

Categories

Product Status