Filter

Showing 1–16 of 33 resultsSorted by latest

Sort:
Show:
HSS BORING BAR SET FOR BORING HEAD

HSS BORING BAR SET FOR BORING HEAD

In Stock
  • All knurls are produced from M2 (High Speed Steel) and hardened to 62 HRC. All knurls are tested to assure work of uniform precision. Manufacturing tolerances are highly precise for knurl thickness and hole diameter. The hole is always concentric and the patterns on the knurls are created under rolled cut method. We offer knurls of straight pattern, Left hand spiral, Right hand spiral and Cross knurl.
RADIAL BORING BAR FOR BORING HEAD

RADIAL BORING BAR FOR BORING HEAD

In Stock
  • All knurls are produced from M2 (High Speed Steel) and hardened to 62 HRC. All knurls are tested to assure work of uniform precision. Manufacturing tolerances are highly precise for knurl thickness and hole diameter. The hole is always concentric and the patterns on the knurls are created under rolled cut method. We offer knurls of straight pattern, Left hand spiral, Right hand spiral and Cross knurl.
BORING HEAD SHANKS

BORING HEAD SHANKS

In Stock
  • All knurls are produced from M2 (High Speed Steel) and hardened to 62 HRC. All knurls are tested to assure work of uniform precision. Manufacturing tolerances are highly precise for knurl thickness and hole diameter. The hole is always concentric and the patterns on the knurls are created under rolled cut method. We offer knurls of straight pattern, Left hand spiral, Right hand spiral and Cross knurl.
Angle Degree Protractors (0 To 180°)

Angle Degree Protractors (0 To 180°)

In Stock
  • Stainless Steel & polished body.
  • Graduations are properly etched to give accurate measurements.
  • Move from 0 to 180&deg.
Steel Protractor

Steel Protractor

In Stock
  • Measures angles from 0-180°.
  • With Adjustable Screw.
  • Satin Chrome Finish.
Vernier Caliper Round Jaws Brass

Vernier Caliper Round Jaws Brass

In Stock
  • For accurately measuring beads, jump rings, and wire diameters without scratching the material.
  • Used by students and researchers for precise dimensional readings of small, delicate components.
Vernier Caliper Brass

Vernier Caliper Brass

In Stock
  • Measures the dimensions of gemstones, beads, and other jewelry components without scratching them.
  • Ideal for hobbyists and craftspeople who need to measure components like small screws, lenses, and tubing.
Tire Tread Feeler Gauge – Single Point Brass

Tire Tread Feeler Gauge – Single Point Brass

In Stock
  • The primary application is to check for uniform or excessive tread wear on passenger cars, motorcycles, and trucks.
  • Comparing the tread depth to legal minimums helps ensure vehicle safety, as worn-out tires lose traction, especially in wet conditions.
Tire Tread Feeler Gauge – Double Point Brass

Tire Tread Feeler Gauge – Double Point Brass

In Stock
  • As a solid piece, a brass tread gauge is highly resistant to breaking or bending, ensuring a long service life. 
  • A double-point brass tire tread feeler gauge is a manual tool used to measure the remaining tread depth on tires.
Profile Depth Gauge Brass

Profile Depth Gauge Brass

In Stock
  • Many brass profile depth gauges are specifically designed for checking tyre tread depth. The gauge measures the distance from the top of the tread to the base of the groove, ensuring tires meet safety standards.
Rotary Table – 4-3/8″(110mm)

Rotary Table – 4-3/8″(110mm)

In Stock
  • This Rotary Table is manufactured from close grained graded cast iron.
  • Chuck Diamater 110mm / 4″.
  • Rotary Table can be used either Horizontal or Vertical.
Rotary Table Tilting – 4-3/8″(110mm)

Rotary Table Tilting – 4-3/8″(110mm)

In Stock
  • Chuck Diameter : 100mm / 4″
  • Vertical center Height : 2-1/16″ (Approx. 51mm)
Rotary Table Tilting – 4”/100mm

Rotary Table Tilting – 4”/100mm

In Stock
  • Chuck Diameter : 100mm / 4″
  • 66mm Overall height in flat position. This relatively low height increases the working capacity for machines.
  • Base dimension : 145mm x 126mm
Rotary Table – 4″/100mm

Rotary Table – 4″/100mm

In Stock
  • Chuck Diameter : 100mm / 4″
  • Vertical center Height : 2-1/16″ (Approx. 51mm)
  • Hand Wheel can be set to Zero
Rotary Table Tilting MT-2 Bore – 4″/100mm

Rotary Table Tilting MT-2 Bore – 4″/100mm

In Stock
  • Can be Tilted from 0 to 180°.
  • Engage & Disengage Function for manual indexing.
Rotary Table – 6″/150mm

Rotary Table – 6″/150mm

In Stock
  • Engage & Disengage Function for manual indexing.
  • Mainly used for  precision work positioning in metalworking.

Filter Products

Categories

Product Status