Filter

Showing 1–16 of 33 resultsSorted by latest

Sort:
Show:
HSS BORING BAR SET FOR BORING HEAD

HSS BORING BAR SET FOR BORING HEAD

In Stock
  • All knurls are produced from M2 (High Speed Steel) and hardened to 62 HRC. All knurls are tested to assure work of uniform precision. Manufacturing tolerances are highly precise for knurl thickness and hole diameter. The hole is always concentric and the patterns on the knurls are created under rolled cut method. We offer knurls of straight pattern, Left hand spiral, Right hand spiral and Cross knurl.
RADIAL BORING BAR FOR BORING HEAD

RADIAL BORING BAR FOR BORING HEAD

In Stock
  • All knurls are produced from M2 (High Speed Steel) and hardened to 62 HRC. All knurls are tested to assure work of uniform precision. Manufacturing tolerances are highly precise for knurl thickness and hole diameter. The hole is always concentric and the patterns on the knurls are created under rolled cut method. We offer knurls of straight pattern, Left hand spiral, Right hand spiral and Cross knurl.
BORING HEAD SHANKS

BORING HEAD SHANKS

In Stock
  • All knurls are produced from M2 (High Speed Steel) and hardened to 62 HRC. All knurls are tested to assure work of uniform precision. Manufacturing tolerances are highly precise for knurl thickness and hole diameter. The hole is always concentric and the patterns on the knurls are created under rolled cut method. We offer knurls of straight pattern, Left hand spiral, Right hand spiral and Cross knurl.
Turret Head Quick Change Tail Stock-3 Head

Turret Head Quick Change Tail Stock-3 Head

In Stock
  • 1 x Drill Sleeve MT2-3.
  • 1x13mm drill chuck with key.
  • 1xDie holder 13/16″.
  • 1xLive Center
Turret Head Quick Change Tail Stock -4 Head

Turret Head Quick Change Tail Stock -4 Head

In Stock
T SLOT MINI CLAMPS

T SLOT MINI CLAMPS

In Stock
  • A safe, quick and simple way to clamp Dies, Work-pieces and fixtures
  • Easily inserted into existing T-Slots, easy positioning without additional fixing
T – Nuts For Rotary Tables

T – Nuts For Rotary Tables

In Stock
  • Economical method of fastening.
  • Finely Blackodized.
  • Resemble T-in Profile.
  • Provide Better retention.
Clamping Kit

Clamping Kit

In Stock
  • Irregular shaped work can be easily hold with the clamping kit.
Mini Clamping Kit

Mini Clamping Kit

In Stock
  • Each & Every unit is Blackodized.
  • Each unit is Blackodized which prevents corrosion & reflection.
  • Quickest & Easiest way to hold the work pieces with the help of this kit.
Clamping Kit-24 Pc Set

Clamping Kit-24 Pc Set

In Stock
  • 24-Piece Complete Clamping Kit – Includes studs, step blocks, nuts, and clamps for versatile work holding applications.
Rotary Table – 4-3/8″(110mm)

Rotary Table – 4-3/8″(110mm)

In Stock
  • This Rotary Table is manufactured from close grained graded cast iron.
  • Chuck Diamater 110mm / 4″.
  • Rotary Table can be used either Horizontal or Vertical.
Rotary Table Tilting – 4-3/8″(110mm)

Rotary Table Tilting – 4-3/8″(110mm)

In Stock
  • Chuck Diameter : 100mm / 4″
  • Vertical center Height : 2-1/16″ (Approx. 51mm)
Rotary Table Tilting – 4”/100mm

Rotary Table Tilting – 4”/100mm

In Stock
  • Chuck Diameter : 100mm / 4″
  • 66mm Overall height in flat position. This relatively low height increases the working capacity for machines.
  • Base dimension : 145mm x 126mm
Rotary Table – 4″/100mm

Rotary Table – 4″/100mm

In Stock
  • Chuck Diameter : 100mm / 4″
  • Vertical center Height : 2-1/16″ (Approx. 51mm)
  • Hand Wheel can be set to Zero
Rotary Table Tilting MT-2 Bore – 4″/100mm

Rotary Table Tilting MT-2 Bore – 4″/100mm

In Stock
  • Can be Tilted from 0 to 180°.
  • Engage & Disengage Function for manual indexing.
Rotary Table – 6″/150mm

Rotary Table – 6″/150mm

In Stock
  • Engage & Disengage Function for manual indexing.
  • Mainly used for  precision work positioning in metalworking.

Filter Products

Categories

Product Status